I'm still trying to work through how to forge and move steel correctly and there is one area I'm struggling with.. well, several but was hoping to get advise on one. The piece I was working on developed a crack around where the tang ends and the blade begins.. so this is much smaller than I wanted it to be. The blade is now just around 6" (excluding tang) and I'm hoping to salvage. I want the blade definition to be sharp by the handle but could not get rid of this curve. The spine is curved so it rocked when I tried to hammer it. Trying to put the curve on an edge of the anvil didn't help much either. Is there a method to forging this curve out or did I make a error in process by letting it emerge in the first place? I was going to just cut it out with the angle grinder.. I'm just going to loose mass and will probably have to chop the tang off so it's not too long. Aside from those problems, this is the best I've done so far forging to a shape and consistent thickness.