vern six

what temp do you take your forge for 1084 to forge with a hand hammer,not color but temp. vern Ps:i have a gas forge.

well thanks to all you fine folks for the word to (GOD) , it worked after the took out a monster blood clot and sowed it up . he's back home already. thank you all . Prayers work , he's proof, almost dead and now great. vern

well i'm asking for a prayer for my brother . he had a stroke and could use the prayers . His name is dave six thanks a lot guys vern

you know your work is the nices on the market. you do superb work. vern

US Knife Makers! vern

anyone know where a person can buy 1 gal Parks#50 with paypal vern

thanks guys vern

you guys are great thanks vern:cool:

[url=""]Here is the tool I would likt to see a photo of. thanks vern:D

well its like to pieces of steel in put your tang between and hit with your hammer while you draw it thru to make it longer

what the tool called that you use to draw out a tang? pic. please

A spring and a hinged, and what ever you have. would alsolike to see a anvil spring clamp vern

show me a fuller'

Where do i find the different types of steel , and ht and all that. this new pc did not let me transfer all that data. vern

how many coats of Satanite Refractory Mortar did you put on your wool. vern forge not gorge

The belts change in about 30 sec. buy the brite handle on the left. just pull on it and it slides and then chANGE BELT OFF AND ON. the only thing lansky is the little clamp witch rides on a bent rod about 2" high . pull the clamp up to the top and sharpen. then take and use the leather belt to make the grind shine.I have a hand made clamp for bigger knives.(6"a up to 10")

thought i would show you my knife sharpener while my shop is warming up. you get a degrees of 17,20,25,30, vern

anyone know what steel is in 1963 IH 1600 truck , front springs?

copy paste enjoy Cuddeback Digital Photo Contest :D

look great to me, if you don't like them, then send them to me (grin)

where in se.iowa can i buy some 1095 1/4 x 2 x 20:confused:

Tanks guys! i'm glad to have smarter people than me to relay on vern

will mild steel make a good knife, and harden up ok?:confused::confused::confused:

(skunkrv) do you live around sigourney

I found a round end stainlesstop out of a ss hotwater heater it is 24" across 8" deep and about 1/8' thick. ? will this make a good forge. just one hole at the rounded end that has a gage in it. any remarks appreciated vern ps i have a gas forge but want to try it a differant way:confused: