Robert Yates

I make a lot of brass hammers for folks here from lil tappers that weigh in at less than 2 oz or les to 20 lb beaters that are a combnation of brass/ bronze However I have not done many steel ones .

Sam

ever seen the Mill spec shops for MOS traning ...... :lol:

Brian that is some awesome work on the hammers I do need some new ones to add to my new shop .

Sam

350 round here tis a small one $1.00 a pound is normal but can get most anvils for less due to being a b-smith .

Sam

Ol Frosty your just like me when it comes to shoes or boots .... I have two feet and i take care of them as I tend to stand on them a Lot proce is NOT an Issue ... No Fu Fu shoes or Boots but Honest ,Good Working Boots and shoes Leather is what I Love and will buy 99.99999 % of the time them DR. shoes and Boots are better than Se% and to a fellers feet knees,and back they are better . don't matter what you are walking on .

as for a floor for a shop concreat is the best dirt packs down and is hard too for equipment and easy cleaning concreat .JIMHO .

Sam

Have you ever heard of Shaffer oil stuff works Awesome and sea foam does too .

Sam

Both Frosty and Thomas have covered the best way to repair the face of the anvil or most any thing else that has a crack in it . I have done it many times working on heavy equipment . even used air ark gouging , Grinding and welding on the armor stuff in the military .
will be looking for the photos .

Sam

it looks like the ones used by the Military ! No joke can't do nothing for the guards on the machines .

Sam

what needs fixing,repaired, or replaced I have one that I am cleaning right now However, Not parting out .if you have photos of the damage I'll see what I can do .

Sam

I use antler tines and the bases of them drill them and tap them in place works good .

Sam

I never Met Gilly, May The Good Lord, give peace to the Family and Her .

Blessing

Sam

Nicely done

Man Big Red I hav som Stakes that need turning with them Bad boys But ya got to leave them with me for the feed i put on for ya ;)

Sam them are Bad A$$

I love it looks awesome I have a tone of elk hide and ruff saw wood

Sam

Well Yetti , I must say Now I am gonna have to steep up and Build one of them dagum things dang you you made me want to go bigger than I wanted too .

Sam

Well Yetti , I must say Now I am gonna have to steep up and Build one of them dagum things dang you you made me want to go bigger than I wanted too .

Sam

Nicely done

WOW it is Awesome

Sam

It Can be done ! as an art

http://news.alibaba.com/article/detail/metalworking/100186291-1-metals-knowledge%253Awelding-dissimilar-metals.html

here is a product that will help you stop Any thing from walking or moving ( and No I do Not work for them ) Hiliti Co
http://www.us.hilti.com/holus/page/module/product/prca_rangedetail.jsf?lang=en&nodeId=-61019

HVU Adhesive Capsule
HVA Capsule Adhesive Anchoring System 3.2.10
3.3.2 HSL-3 Heavy-duty Expansion Anchor

Here are 3 types of products that will keep your hammers PUT and Ancored where ya set them


And Yes I have used them !

Best Regards

Sam

I removed A bad face last week cut it lose with a torch and cleaned the anvil up and attached a T11 3/8 plate steel to it with a few plug welds and a primiter weld for a local farmer / smith the rebound was awesome and worked very well the he was very happy as it had been in the family for many years .

Sam

Boysey ,Niechie , whay do you need made I can plasma cut and mill about anything you need Brother I have writen many programs for CNC machines .

Sam

anhydrous sodium sulfate melts at 888°C and a bit of iron that is the mix this why it workd So well .

Sam

is it cast or Coated

Analyses, %







52100

MOD #1

MOD #2



Carbon

.93-1.05

.92-1.02

.87-.97



Manganese

.25-.45

.95-1.25

1.40-1.70



Phosphorus

.025 max

.025 max

.025 max



Sulphur

.025 max

.025 max

.025 max



Silicon

.20-.35

.50-.70

.60-.80



Chromium

1.30-1.60