Jump to content
I Forge Iron

don't tread on me

Members
 View Profile  See their activity

  • Posts

    294

  • Joined

  • Last visited

 Content Type 

Everything posted by don't tread on me

  1. don't tread on me
    You can't harden aluminum.
  2. don't tread on me
    Thanks.
  3. don't tread on me
    This is a knife I made fore a friend in OK what do you think?
  4. don't tread on me
    Cut the plate back until you have a straight edge then bolt a plate of the same thickness on top of the cast iron ,welding it to the old plate, then lay a plate on top of both of those and weld them together.
  5. don't tread on me
    hardie 004.jpg
    I finaly have a hardie that doesn't jump around in the hardie hole. I never had the right size stock to make a good one before.
  6. don't tread on me
    Thanks.
  7. don't tread on me
    You can use a loan mower blade for the spring, I made a post vise out of well pipe and that is what I did.
  8. don't tread on me
    I didn't see a gold bar and they worn't gold plated.
  9. don't tread on me
    What is so much better about a post vise?
  10. don't tread on me
    Do you know what the weight would be, I am not serten on the weight.
  11. don't tread on me
    my knife 002.jpg
    Thanks.
  12. don't tread on me
    my knife 002.jpg
    I made this knife before I knew about carbon in metal, so it is vary soft.
  13. don't tread on me

    Hi Uncle Dale.

  14. don't tread on me
    In answer to Phil, My dad sead I cannot use a dimmer on this moter and he is an electricion. In answer to Francis, I closed the the ash dump and loosened the belt and suddenly I melted the end of a peace of rebar. Thanks all.
  15. don't tread on me
    I have a friend that goes around buying old cars and other scrap, He lets me take what I whant, the other day he evan gave me some peaces of 2 1/2 inch angole iron, 5 to 6 feet long. I'm useing it to make a trip hammer. Ofcorse I tolded him he would have use of it when it was done.
  16. don't tread on me
    The problem is more likly to much air becose if I want to I can blow the charcoal out of the forge.
  17. don't tread on me

    Didn't relise I posted that already.

  18. don't tread on me

    Thanks for the comment.

  19. don't tread on me
    No I just tighten or loosen the belt by moving the moter forward or backward. I hve an ash dump but the handle broke off, but I have ben leaving it open. stuped me
  20. don't tread on me
    another knife 001.jpg
    Mower blade.
  21. don't tread on me
    Here are some pics, in these pics I didn't have the moter hooked up when I took them but, it is now hooked loosely to the belt.
  22. don't tread on me
    Thanks Sask Mark.
  23. don't tread on me
    I am having the same problem but I know it isn't my air flow because I can blow the charcoal right out of the forge. I use my own charcoal made from pine. I have an electric moter hooked up to an old blower, I don't know what model the blower is.
  24. don't tread on me
    The numbers are 125 then an A on its left side then A75648.
  25. don't tread on me
    another knife 001.jpg
×
×
  • Create New...