Farmall

Looks like a large basket form to make consistent sized baskets............maybe bushel baskets.

No worries. Just trying to help.

I just took a look at it and the last wieght selection only goes to 23 pounds, not 27 since the middle number represents 28 pounds.

Could be a peter wright. They had the words "Solid Wrought " and "patented." on the side. May be that all of the markings cannot be read. Other than that, your guess is as good as mine. Not sure about the markings on the Trentons or Trextons. I think they had "solid wrot" or something on the side, but not the word "Patented" like on the Peter Wright.

Heard of them, and Heard them! Was at a blacksmith gathering in February that had an anvil shoot as well. Kinda loud, kinda dangerous, but is interesting to watch.

There are some grinder marks on the surface.

It's going to go for at least another generation. I won't let this beauty not do any work. Really like the nice wide face. It's almost 5 inches wide!.

It definitely says "Sheffield" and "Alsop" with weight marks of "1" "X" "25" . Someone obviously did grind on the top some, but it is in great shape, nice edges, rings like a bell with a great rebound. Hard to imagine its around 220 years old!

Thanks Phil.

That's been my problem....they are kinda narrow in the toe box....but was wondering what others thought. Thanks.

used the search function and found some older threads (year or two) about preferred boots, and since I am in the market now, was hoping to update. Seemed like a lot of Redwings, Wolverine, and even Danner boots were mentioned. As I have a wide foot (EEEE), I was wondering what other people are wearing? Staying with Redwings? I have a pair of Redwings that are ok, but have never been real comfortable...after having them repaired a number of times, I've decided to splurge on a new pair-am not wedded to Redwings, so, suggestions?

That is a great looking wrench. How'd you texture it like that?

Looks like a sawyer's anvil.

Just weighed on the scales....132 pounds....maybe it is actually 100 pounds weight + 29 if it's 112 + 25, then it would be 137 - could it have lost 5 pounds of weight over the years? I really don't know.

I was just looking at Anvils In America last night relative to the early anvils. In it, Postman says that anvils didn't have cutting tables until around 1780 or so, but certainly after 1800. Without the pritchel, according to Postman, it's pre-1820. As far as maker, there were many and without markings, usually unknown. So, I would say it's most likely an English anvil from around 1800 (plus or minus 20 years) based on what I read last night. Hope it helps. Is a nice anvil.

Thomas, I was thinking the same thing. I understand about the CWT...but it does kinda look like a 29. Maybe it is a mistake, but you still can't have a 29, that's why I was thinking it was a 25. Although, if I remember correctly, some early anvils in AIA have weight marks that include a "31". Haven't weighed it on the scales yet, but it feels like around 140 pounds, maybe less. When I get home tonight, I'll weigh it and found out its current weight and post that.

maybe it is a 29. Once get the paint off, it might be easier to read.

In a previous topic titled "help with an anvil", I was asking for opinions on a colonial anvil I got a lead on. Well, I went and got it. It's marked "Sheffield" and "Alsop" and an interesting weight mark of "1" "X" "25". Is in great shape. Looks like the Alsop on page 14 of Anvils in America, and Postman dates that one around 1787 or so. Regardless of its age, its in great shape. What do you think? Oh, the fella I got it from had just spray painted it today to make it look better. Now to clean that off....

Sorry. Thomas about not posting location. I was working on my previous post when you posted. The anvil and I are in Virginia.

It does look painted to me as well. Weight supposedly "more than 200 pounds",

I think this is the week for finding possible anvil purchases....had the earlier post about the cast one, now I have been offered a really nice colonial anvil. Here's the photos I was sent from the guys phone. Any ideas on maker? There is a hint of writing on the side, but doesn't look like "Mousehole" to me. Any ideas on make? I am going to look at it Thursday. It's seems to be a nice early one (no pritchel). Thanks for any and all help.

Thanks for the information....I was thinking it was cast as well, but was not sure. I probably go buy and look at it, but I don't think I need it. I've got a nice little 70# fisher that works well....just looking to get a bigger anvil when opportunity strikes.

Fella sent me this picture of an anvil he wants me to buy. No price suggested yet. Any ideas as to what kind it is? Could it be a Vulcan because of the stubby shape and the "12" on the front. Does that mean 120#? What do think a fair starting price would be...$150? $200? He's bringing it buy next Friday, so I am just trying to get some idea of fair price.

Well, ciladog, I believe that everyone has a duty to solve problems on their own with the tools available. If we are speaking of hands on things like blacksmithing, this includes experience of others. I didn't learn to weld by reading about, or talking or asking about it. It was hands on, but I had a heads up to many of the pitfalls that beginner welders face. After I did it on my own for a bit, I got some experienced welders to look over my shoulder and guide me.

I've got some family in Northern Indiana....was worried about them, but prayers are sent for southern Indiana folks.