New Jersey Blacksmith Association

There is a hammer in set to take place on Sunday, 6 November. According to the NJBA's latest newsletter, it will be at the Blacksmith of Trenton and run by Daniel Lapidow. The newsletter doesn't give a time, just to look up the times from the previous event (Jan 2022?), so I'm guessing it will be happening between 10:00AM and 4:00PM. Is there anyone that can confirm this? I sent out a few emails a week ago but haven't received any responses. If anyone can help with additional information or can confirm the time, I would appreciate it. Thank you!

Daniel Lapidow (the Hebrew Hammer Blacksmith) will be giving a tour of The Blacksmith of Trenton (334 North Olden Avenue, Trenton, NJ), an active blacksmith shop since 1823. The tour will focus on the history of the shop, the various projects that have been created on-site, and a live blacksmithing demonstration. The live demonstration will cover various projects that have proven popular at craft shows and have been successful at generating individual sales revenue. The demonstration will focus on such items as fireplace pokers, household hooks, bottle openers, and other items that sell consistently. The tour of the facilities will encompass a history of the sho…

Sunday, September 17th 10:00am - 4:00pm Red Mill Tool Swap/Picnic, Our annual picnic and tailgate sale at the Red Mill, Clinton, NJ. (See next newsletter for more details.) Sept. (date TBD) Meet at the Shop of the Blacksmith of Trenton. This is not an NJBA event. The date will not conflict with the Red Mill event. (See next newsletter for more details.)

Hi all! I thought I'd let you know about a Damascus making workshop the New Jersey Blacksmiths Association is holding this Saturday. The course runs 6 hours and the total cost is $125 (plus $20 to join the NJBA if you're not a member). If you'd like to participate, comment below or send me a PM and I'll send you Mark's contact details and the workshop location. Here's the excerpt from our newsletter: We hope to see you there!

Peters Valley is holding an open house and studio tours next Sunday (May 7). The event is free, and there will be blacksmithing demonstrations. Tailgating is permitted, so this is a good opportunity to buy or sell equipment. (for more information, see page 4 of our newsletter) Description from the newsletter: This event should be a lot of fun. We hope to see you there!

Brought to you in two parts! http://njblacksmiths.org/archive/njba203a.pdf http://njblacksmiths.org/archive/njba203b.pdf Enjoy!

Here is the New Jersey Blacksmith Association web page. http://www.NJBlacksmiths.org

Excerpt from our newsletter: Saturday May 27, professional swordsmith and NJBA Director Mark Morrow will teach the making of a billet of Damascus steel at a workshop to be held 10AM to 4PM at Marshall's Farm. The fee for the workshop is $100 plus $25 for materials, and is due on registration (not later than your arrival at the event). Space in the workshop is limited. Contact Mark to register for (and secure your space in) the workshop. Like all hands-on events, this workshop is open only to NJBA members, but nonmembers may join when registering by paying the $20 membership dues. Tailgate sales welcome. Contact details are available in our newsletter. If you're …

Hi all, Open forge at Marshall's will resume 02/13. These are every Monday at 7:00. Marshall's address is in the NJBA newsletter, or PM me for details. We hope to see you there! -Ryan

We would like to welcome the New Jersey Blacksmith Association to the IForgeIron forums. This is you forum so please post your events, meetings, information, newsletters, etc. After the events please post photos of the event so we can see what we missed by not being there. Welcome to IForgeIron.

saturday november 10 the njba will hold an anvil repair workshop the cost of the work shop is $120 and is open to all njba members you are also free to join the day of the event if you would like more info feel free to message me .

hello the njba will be having an event at Walnford Park on October 7th if you would like more info please fell free to message me jose torres