S.Willis
Members
-
Joined
-
Last visited
-
-
Very nice work.
-
Nice little axe. I glad to know. I am not the only one uses flat edges with round corners on my slitters. People always looks at them and roll their eyes. It seems I can keep it straighter with them. Been using them like that for 25 yrs.
-
Thanks for posting. I could not make it but your pictures are the next best thing.
-
Nice looking scrolling pliers.
-
-
Nice one Butch. I was just thinking, after we talked about the tire hammers the other day. Wondered how many hits those hammers have made.
-
I got mine off ebay. There're usually tons of them on there. Just do a searh for gun drill in the industrial and metalworking catagory. Here's a picture of what they look like. Stuart
-
I have tried ever possible way in the world to drill by hand with consistency. Given you have a sharp and straight bit. It still tries to wonder around because of the chips and the heat. I have lucked up on a few, but ruined alot of nice hawk handles. The best way, if you are set upon doing it yourself is the laminated way like has been mentioned. Or buy from Dunlap. I do drill my own. But I do it on the lathe with handle in the chuck and turning , and the drill bit in the tail stock. I use a 1/4 gun drill which has a hole down the middle that I blow air thru. There is a groove down one side to evacuate the chips and I still have to go slow.
-
Unbelievable!!! I would sale any of mine for half that.
-
Nicely Done!!!
-
9 am until
-
Very nice !!!!
-
Welcome. Great to have another NC guy around. Wayne that should be in Morganton for the Big Blu shop. (3-17-12)
-
About the same price here. The 1/2 ton of coal will last for months . The same dollar amount of propane will only last for hours.