Damascus Mike Posted March 4, 2009 Share Posted March 4, 2009 (edited) Can anybody who has blue prints for making a cheap,safe and useful belt sander please send them to me at Michael.meyer@live.co.uk(im in New Zealand but my brother made my email as uk) ? ive already got a motor and some leaf spings in case i need them. thanx Mike Edited March 4, 2009 by Damascus Mike Quote Link to comment Share on other sites More sharing options...
David Einhorn Posted March 4, 2009 Share Posted March 4, 2009 You will find the information at: http://www.iforgeiron.com/forum/f43/belt-grinder-blueprints-3685/ Quote Link to comment Share on other sites More sharing options...
saintjohnbarleycorn Posted March 4, 2009 Share Posted March 4, 2009 this has recently been discussed in the machinery section, and in other places, do a search and see what people say. good luck its a very handy machine to have. Quote Link to comment Share on other sites More sharing options...
mcraigl Posted March 4, 2009 Share Posted March 4, 2009 "belt sander" is a rather broad term. What kind of machine do you want to build, and what equipment and expertise do you have available to you? If you have a waterjet shop nearby I have a cad file that they can cut parts from, but you'll need to weld a couple of parts, then countersink, ream, and tap a bunch of holes. My design is set up for a "C" face motor with a 7/8" shaft. It could be modified to fit any motor though. My file is NOT what I'd call a blue print though. It's not dimensioned, and has no instructions. It's just a cut file to be given to a machine shop. Quote Link to comment Share on other sites More sharing options...
Damascus Mike Posted March 5, 2009 Author Share Posted March 5, 2009 well im actually looking at building a cheap one because ive already got a motor a few pully weels and sum pully belts, other requirements i can get from work. Quote Link to comment Share on other sites More sharing options...
rsilver4 Posted March 7, 2009 Share Posted March 7, 2009 Go to this site,they have the no-weld grinder plans--US Knife Makers!, Operated by a knifemaker for knifemakers! Quote Link to comment Share on other sites More sharing options...
Damascus Mike Posted March 7, 2009 Author Share Posted March 7, 2009 thanx but im trying to one from almost nothing and as cheap as i can because i dont have alot of money so i wanna make one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.