Matt in NY Posted November 7, 2008 Share Posted November 7, 2008 I read in The Backyard Blacksmith that it is possible to make a swage block from a block of wood. Has anyone here ever done this or seen one? I have a couple unsplit log lengths that I have been thinking about using, oak and apple. I'm trying to think of how to dig out a hole in them. I also have been reading the blue print section and have found some suitable starts for a swage block using the OIC method. I have an old draw behind seeder that will yeild lots of stuff. Also, my pigs have been digging up plenty of goodies for me. I put them in an area that I am clearing and cleaning up. There used to be a shed there. I have retrieved several wrought iron hinges, wagon parts and hammers. They are still working, but they'll see the smokehouse soon. Quote Link to comment Share on other sites More sharing options...
John Martin Posted November 7, 2008 Share Posted November 7, 2008 Um, a drill and a drill bit. Buy one of the ones that are used for drywall for putting huge holes in walls, but get one for wood. (Many actually). The other thing is you drill a circle and then punch the inside out and sand it. I'd go with the drywall one though, faster and easier. Quote Link to comment Share on other sites More sharing options...
Justin Caradoc Posted November 7, 2008 Share Posted November 7, 2008 to make a "ladle" form you can use a 4" cuttoff wheel in an angle grinder. That is what I used to make my dishing form for armor. I took the wheel and laid it flat on my oak stump and traced the outside circle and inside circle to use for the round pattern. I then slowly cut out the dish. I only rough cut it into a bowl then I used a hammer to pound the grain flat. If you are going to use wood for a swage block I would sugest you use the end grain for the forms. cut out the form then hammer smooth. Hammering compresses the grain which makes that part denser so there is less deformation when you hammer into it. Quote Link to comment Share on other sites More sharing options...
hill.josh Posted November 7, 2008 Share Posted November 7, 2008 You can also burn the holes into it. If you want it to last longer try hammering some sheet metal into the most used parts.. worked pretty good for me Quote Link to comment Share on other sites More sharing options...
rustyshackleford Posted November 7, 2008 Share Posted November 7, 2008 I've got a small 5x4x4" piece with some spoon and ladle forms in it. Very effective. Used a chisel and dremel, then the hammer like Justin mentioned. Quote Link to comment Share on other sites More sharing options...
Frosty Posted November 7, 2008 Share Posted November 7, 2008 Just start using it with hot steel, the forms will develop soon enough. A few good blocks of wood are necessary in my shop. One of my main uses is to straighten twists. Use a wood block and wood mallet to hammer twisted stock straight or contour as desired without damaging the detail. Frosty Quote Link to comment Share on other sites More sharing options...
Old South Creations Posted November 7, 2008 Share Posted November 7, 2008 good ideas. I was wondering how effective a wood swage block would be too...glad you asked the question! Quote Link to comment Share on other sites More sharing options...
Gobae Posted November 7, 2008 Share Posted November 7, 2008 I made a dishing swage from a stump of oak using one of these:http://www.woodcraft.com/family.aspx?familyid=926 Very aggressive and quick. The only caveat would be, that despite its looks it doesn't leave shavings of any sort, but lots of sawdust. So, good ventilation or a mask is most helpful. Quote Link to comment Share on other sites More sharing options...
Bentiron1946 Posted November 8, 2008 Share Posted November 8, 2008 Thirty years ago or so in Oklahoma I met a smith that had a very large elm stump that had a whole series of depressions in it. They were well used and charred some. He used them the shape his spoons, ladles and bowls. He did have a cast iron swage block for making tenons and such but he sure made some beautiful stuff on that elm stump. I am thinking that maybe the Iron Age smith use wood swage blocks before the advent of large scale casting. Quote Link to comment Share on other sites More sharing options...
Flaming S Forge Posted November 8, 2008 Share Posted November 8, 2008 I use hickory and white oak for mine. I welded a square shaft that fits my hardy hole to a flat piece of metal and screwed it fast to the bottom of the wood. I used a grinder to roughly make the shape I wanted. Hammering the hot metal made the final shape I wanted. It works real nice attached to the anvil. Soak the wood in water before you use it or it will burn in deeper than you really want it to. I did a demo making spoons with horse heads on the handles at our county fair recently and took my wood swages along. I purposely didn't soak them so I would get flames and smoke as I worked. The spectators loved it. The person that invited me to do the demo told me he wanted to hear lots of hammering and see some smoke. I gave him what he wanted and was invited back for next year. Quote Link to comment Share on other sites More sharing options...
divermike Posted November 8, 2008 Share Posted November 8, 2008 Matt, one of the NYSDBA members can get old bridge segments, he gave us some, 14 by 14 old growth timbers, he said he could get more. Any chance you will be at the Sylvan beach all hands meet? Quote Link to comment Share on other sites More sharing options...
Matt in NY Posted November 8, 2008 Author Share Posted November 8, 2008 No, this is a busy time of year for me. I'm trying to get stuff squared away for winter. I haven't even got all my potatoes dug! Then there's butchering to do. I told myself I have to get things in order before I get to putting a shop together and really start to do some blacksmith exercises. I have a lot of learning to do. And, a lot of setting up to do. Thanks though, Matt Quote Link to comment Share on other sites More sharing options...
creek Posted November 8, 2008 Share Posted November 8, 2008 I've got a couple of stumps I use for forming. Frosty is right, you just start hammering hot metal on it and it will start to burn a shape in it and give a nice smell! I think I seen something on youtube where someone was using a stump, but not for certain. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.