May 14, 20233 yr I would guess a wrench to turn valves (gas?) where some have a aquare indentation to accept the left side of the wrench and some have a tab which would be turned by the slot on the right side. Just a SWAG on my part. "By hammer and hand all arts do stand."
May 14, 20233 yr Or possibly some type of tin bender, hammer combo? The hole in the middle makes me think of the wire rolled fender edges. Maybe it could slide on for shaping. Just a variant wag.
May 14, 20233 yr Hi what you have there is a tool to that is a saw set. Was used on two man cross cut saws as part of the care and maintenance to keep them tuned up and cutting efficently. All saws have to have set to help clear cuttings from to kerf as they cut. There are other tools to help keep them maintained also. I have lots of those saw tools from sets like yours to the gauges tensioning hammers and anvils.
May 15, 20233 yr I believe Direwolf nailed it. I can't control the wind, all I can do is adjust my sails. ~ Semper Paratus
May 15, 20233 yr Author 18 hours ago, Direwolf said: Hi what you have there is a tool to that is a saw set. Was used on two man cross cut saws as part of the care and maintenance to keep them tuned up and cutting efficently. All saws have to have set to help clear cuttings from to kerf as they cut. There are other tools to help keep them maintained also. I have lots of those saw tools from sets like yours to the gauges tensioning hammers and anvils. Hey, thank for the info. I appreciate it.
May 15, 20233 yr Thanks Direwool, there's nothing better than learning something as soon as I turn my computer on! Frosty The Lucky.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.