JHCC Posted February 18, 2022 Posted February 18, 2022 We're getting dangerously close to a political discussion, folks. Let's cool it down before the mods come a-callin'. Quote
Wildonion Posted February 21, 2022 Author Posted February 21, 2022 So I am trying to figure out exactly what to do. The 2 cylinders are 3.5" diameter which I fear may be to small. I really like the look of the welded fork tyne anvil Thomas made. I was considering welding a piece of the tyne to the 170# scale rail or to the rail car coupler in the pictures. Thoughts? The coupler has a large mass to it but is not very hard compared to the cylinders or tynes. Quote
FlatLiner Posted February 22, 2022 Posted February 22, 2022 If it were me I would weld up a forklift tine post anvil and use the cylinders as horns, save the rail road rail for future projects, and use the coupler as a striking anvil if you ever have someone striking for you. The coupler has some great features, it looks like you have a built in dishing depression/ straightening. It works well on end as a post anvil, has a hole that you can drift through. The possibilities are endless. Quote
BIGGUNDOCTOR Posted February 22, 2022 Posted February 22, 2022 Stand the coupler on end and get to work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.