Andy Outdoor Posted January 18, 2021 Share Posted January 18, 2021 Hi I acquired a massive mill vise. When I mean massive... it ways about 150 lbs. The width of the jaws 8 inches and opens to over a foot. I cannot find any marking of what model or brand it is. So that’s why I’m here. Quote Link to comment Share on other sites More sharing options...
George N. M. Posted January 18, 2021 Share Posted January 18, 2021 That is a brute. Depending on how hard those blocks are it could make a good combination anvil and vise. How fast is the thread? Does it seem you have to crank the handle a lot or a little to move the jaw? Sorry, I can't help you with the ID. "By hammer and hand all arts do stand." Quote Link to comment Share on other sites More sharing options...
Andy Outdoor Posted January 18, 2021 Author Share Posted January 18, 2021 It surprisingly turns and moves very smoothly. The only thing is when I want to expand the jaws further I have to move a huge pin at the bottom. Good idea with the vise/anvil combo! Quote Link to comment Share on other sites More sharing options...
swedefiddle Posted January 18, 2021 Share Posted January 18, 2021 Good Morning, I have one very similar, I think I bought mine at Grizley. Neil Quote Link to comment Share on other sites More sharing options...
Andy Outdoor Posted January 18, 2021 Author Share Posted January 18, 2021 Do you have a picture you can post? I checked Grizley vises and could not find it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.