Jump to content
I Forge Iron

Heat treating question


Recommended Posts

Now you do know that heat treat does NOT mean harden right?  Annealing is a heat treat that makes the steel very soft. So when you ask if you need to heat treat them you need to tell us if you were thinking of making them soft, or tough, or hard or what?

If they were made from mild steel then heat treating usually doesn't do anything---you can quench very low carbon steel in water and it won't harden!

If they were made from high carbon steel I would normalize them to make them tough but not brittle.

So you need to give us what alloy they are to know if the heat treat result you want is even possible.

If you will be hanging stuff from them you may want to round the contact edges to decrease wear on the hoses.

Link to comment
Share on other sites

ThomasPowers

I'm relatively new to the craft, I was under the impression that heat treating meant hardening. Thanks for correcting me! Also, I don't know the alloy, I think it's just mild steel. The metal just appeared in my project bucket one day, I don't even know where it came from or who put it there. Also, thanks for the tip about rounding out the edges. I'll make sure to do that. 

Link to comment
Share on other sites

In general high carbon steel is not used except where it's properties are needed as it's more expensive to make and work and requires heat treatment after working to get the results wanted. Businesses tend not to like paying more unless they absolutely have to.   

On the other hand I have had High C scrap sneak into what I thought was only Low C stuff.  So when working with scrap metal of unknown provenance you may want to test it with either the spark test or the heat past critical and quench and try to break test. (USE PPE! If it was HC; then it can shatter sending shrapnel!)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...