Dave Sash Posted November 13, 2018 Share Posted November 13, 2018 Acquired a 125# anvil . Markings on the side are very faint. Any help would be great. Thanks Quote Link to comment Share on other sites More sharing options...
Black Frog Posted November 13, 2018 Share Posted November 13, 2018 ACME anvil made by Trenton (Columbus Forge & Iron Co.). 1916 ballpark according to AIA. Quote Link to comment Share on other sites More sharing options...
Nobody Special Posted November 13, 2018 Share Posted November 13, 2018 Yah, now all you need is a wiley coyote. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted November 13, 2018 Share Posted November 13, 2018 Acme was a trademark used by Sears Roebuck; hence it's use by a "remote" living coyote... Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted November 13, 2018 Share Posted November 13, 2018 Welcome to IFI Dave, Have you read this yet? https://www.iforgeiron.com/topic/53873-read-this-first/ It will help you get the best out of the forum. I've dodged a few anvils in my day but never an Acme as nice as yours. Hope you have read about not doing any grinding, welding or milling on the hardened face. Hammering hot steel on it will make it shine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.