Firered8305 Posted September 16, 2018 Share Posted September 16, 2018 What do I have here folks. What do the numbers mean. How much is this worth. Z111. A19975. Thanks Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted September 16, 2018 Share Posted September 16, 2018 Welcome to IFI... The picture from the opposite side (horn to right) might have a makers mark, which would/might show up with a wire wheel brushing. Quote Link to comment Share on other sites More sharing options...
Fatfudd Posted September 17, 2018 Share Posted September 17, 2018 Its an early Trenton anvil that weighs approximately 111 lbs. The value of the anvil is highly dependent on your location. If you are in South Africa, Poland.or New Zealand it price would be in the local monetary unit. Without knowing your location its anybody's guess. Since almost every country in the world is represented on IFI you'll need to be a little clearer on where you are at.. Quote Link to comment Share on other sites More sharing options...
Firered8305 Posted September 17, 2018 Author Share Posted September 17, 2018 Indiana, United States Quote Link to comment Share on other sites More sharing options...
Black Frog Posted September 17, 2018 Share Posted September 17, 2018 Please post a picture of the side of the anvil, horn facing right. There might be some remnants of the logo stamp still visible. Quote Link to comment Share on other sites More sharing options...
John in Oly, WA Posted September 17, 2018 Share Posted September 17, 2018 The first letter designates who made it. In your case, that would be Charles Zulty of the Columbus Forge and Iron Company. Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted September 17, 2018 Share Posted September 17, 2018 6 hours ago, Firered8305 said: Indiana, We won't remember this after leaving this thread and United States is a big place. You might want to add that to your profile so it shows up with every post. Can't tell about prices in Indiana but here in Arkansas it would go for $250 up to $400 dollars U.S. depending on how the ring & rebound were. The face plate looks to be in good condition. Did all the tools shown come with it? If so that would boost the price. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted September 27, 2018 Share Posted September 27, 2018 How fast do you want to sell it? That alone would vary the price by a dollar a pound or more! At Quad-State, Troy Ohio, last weekend it would have been priced at 5 to 6 US dollars a pound; but I didn't see many anvils selling at those prices! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.