Jump to content
I Forge Iron

Is this a Blower?


fieldsjoe89

Recommended Posts

Save that thing NOW.  It's not only a blower, but an excellent one to have and use.  The negative is that sitting might have made the needed re-hab a lot more difficult.

Here's a video from Joey van der Steeg on that specific blower and what you need to know.  He has several others on rebuilding the blower as well as some other excellent smithing videos that are always well worth watching.  

 

Link to comment
Share on other sites

I believe you would be much happier with a brake " rotor" forge than a brake drum forge. 

In particular the rear rotors that house the drum style E brakes. Around 2-3"deep and around 8-9" diameter. They set down in a hole in a table nicely and can be made to interchange for different tasks eg. Heavy and light forging.  Easy to get cheap or free as well. The 2" T pipe can be inexpensive or cost a little new but you won't wear it out, and if done right can be used on multiple rotors. Dont forget the weighted flap cap at the bottom of the T. Much better than the screw on cap. 

Just an opinion of someone who uses one. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...