Uyuni Posted January 28, 2018 Share Posted January 28, 2018 Rounding up tools to get into blacksmithing. Hammers? Quote Link to comment Share on other sites More sharing options...
JHCC Posted January 28, 2018 Share Posted January 28, 2018 The hammers are good, but the combo tool only has value as a machinist’s vise. It’s not strong enough to withstand any kind of serious hammering. Quote Link to comment Share on other sites More sharing options...
Marc1 Posted January 28, 2018 Share Posted January 28, 2018 I would take both jaws off and use it as a bench anvil for small jobs with small hammers. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted January 28, 2018 Share Posted January 28, 2018 Cast iron body, use as an anvil will result in it's destruction. Use as a vise should be good for many years! Quote Link to comment Share on other sites More sharing options...
Uyuni Posted January 28, 2018 Author Share Posted January 28, 2018 thanks for the feedback guys! I already have a Fischer anvil, so I'll just plan on using this as a shop vise per your recommendations Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.