Sixty7x Posted January 7, 2017 Share Posted January 7, 2017 Hello everyone, I'm new here. Always wanted to start blacksmithing but time, life, money and other hobbies always seem to take precedence. I thought I would share my project with people that might be interested in how I went about building my anvil. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted January 7, 2017 Share Posted January 7, 2017 Take a piece of chalk or soapstone and mark off on the face of your anvil the area where there is metal all the way down to the feet. That is the Sweet Spot where your hammering does the most good. Generally people are trying to maximize that area. Your design does not, can you explain your design philosophy? Quote Link to comment Share on other sites More sharing options...
Sixty7x Posted January 7, 2017 Author Share Posted January 7, 2017 I understand exactly what you are referring to. My plan was to weld the void between the two feet. When I preheat the anvil to do the welding on the horn I will fill the space between the feet. At that point there will be a solid mass from the face to the base 1 1/2" in from both sides about 6 1/2" wide. Quote Link to comment Share on other sites More sharing options...
VaughnT Posted January 7, 2017 Share Posted January 7, 2017 That's a very nice build! Fun video, too. As for the horn, I'd prefer a concentric cone just so you could more easily use it for truing up rings and such. But, like you noted, a bit of hard face rod to round it out again sure wouldn't hurt. Fisher anvils have a hard steel top plate on their horns and I've always found them a pleasure to work on. Just out of curiosity, what kind of value would you put on a fabricated anvil like that? There's a ton of machining and welding time there, so I expect it would be pretty pricey if a hobbyist wanted to have their local machine shop do a similar build for them. But, would it be cheaper than buying a new anvil of similar weight? Quote Link to comment Share on other sites More sharing options...
Sixty7x Posted January 7, 2017 Author Share Posted January 7, 2017 I put about 35 hours into it. I would most certainly think buying a new anvil would be cheaper and you would have a far superior product. This was done in my spare time At no cost to me. I'm having a hard time parting with hundreds of dollars for an anvil that is cracked, beat up, chipped edges, etc... This project was fun for me. Quote Link to comment Share on other sites More sharing options...
bubba682 Posted January 8, 2017 Share Posted January 8, 2017 Nice havin the gear 67x nice work man,i know what your sayin about price be glad your not here in Canada the cost of the hardy tools were over a third more than the US.I got lucky on my anvil i got for 150.00 just had to dig it up and clean it off. Quote Link to comment Share on other sites More sharing options...
Sixty7x Posted January 8, 2017 Author Share Posted January 8, 2017 I hear ya. I have no doubt a deal will come my way. Until then I'll just go with the "need a tool Make a tool" method Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.