pintail1 Posted March 11, 2015 Share Posted March 11, 2015 Put together and anvil stand over the past few days (anvil is peter wright) and also forged my first metal: heated metal in my woodstove (Tough to get a good hat but I managed).It felt great.We are starting to thaw (Northeast) and in the next several weeks I hope to get the forge (Centaur) operating. Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 11, 2015 Share Posted March 11, 2015 Nice stand though I like to make them wide enough to put a little rim around the feet but properly dogged down and it's not a real issue. I just like having a place to set tools I'm using at the time.Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
norrin_radd Posted March 16, 2015 Share Posted March 16, 2015 That is a sharp looking stand and anvil. That top plate is perfect for installing some tool holders. Quote Link to comment Share on other sites More sharing options...
pintail1 Posted March 17, 2015 Author Share Posted March 17, 2015 I cut the taper on my table saw (nothing fancy) with a tapering jig I made in about 10 minutes: Have photo of q jig (mine not so fancy) and schematic of stand attached. Stand Diagram.tiff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.