Here is my new travel forge its just the pan at the moment still need to make and install a firepot and plum in the blower and ash dump.

It is set up for a Champion 400 blower.

 

James

My only thought is the direction the blower intake is pointing. I'm thinking it's going to be inhaling smoke from the fire rather than fresh air. That's just a fiddly bit though and easily corrected if it is a problem. all in all it looks like a perfectly good working forge.

 

Frosty The Lucky.

ya i was wondering that myself but i always can move later

Ya but you know how us blacksmiths are we think we built something perfect but within the first ten min of use modifying to make it better :) although i am speaking for myself

Ya but you know how us blacksmiths are we think we built something perfect but within the first ten min of use modifying to make it better :) although i am speaking for myself

 

You sure are! I've NEVER heard of a blacksmith doing something less than perfect first try. :rolleyes:

 

Frosty The Lucky.

would 1/8 be thick enough for a forge table?

yes it would as long as you have a fire pot your good to go. i am going to put braces on when i get the fire pot made for this forge so the pan doesnt warp