VaughnT Posted November 20, 2013 Share Posted November 20, 2013 Made this one a few years ago. The blade's 1084, I believe, and just under an eighth of an inch thick. A bit thin for general purpose use, but I was going for a primitive 'poor boy' style for a patch knife to go with my flintlock. About 3.5" of cutting edge with a short, 4" or so handle. A tad narrow right at the junction, but fully capable of skinning a deer or cutting a patch. Quote Link to comment Share on other sites More sharing options...
bikecopXXX Posted November 20, 2013 Share Posted November 20, 2013 that is really nice. I presume a patch is for muzzle-loading?The blade almost looks like damascus. Quote Link to comment Share on other sites More sharing options...
bnewberry Posted November 20, 2013 Share Posted November 20, 2013 Nice! 1/8 inch is a great thickness for a knife like this. Historically blades were much thinner than we typically see them now.Plus a thin blade slices better. Quote Link to comment Share on other sites More sharing options...
windancer Posted November 20, 2013 Share Posted November 20, 2013 Love evrything about this knife! Good job. What is the wrap you used on the handle joint? Dave Quote Link to comment Share on other sites More sharing options...
BCROB Posted November 20, 2013 Share Posted November 20, 2013 its a great piece , well done !! Quote Link to comment Share on other sites More sharing options...
VaughnT Posted November 20, 2013 Author Share Posted November 20, 2013 Thanks for the kind words, gentlemen. Dave, the wrap is deerskin rawhide I made some time ago. Very thin stuff and it really conforms well to the texture of the antler. I use a wrapping of gutted 550 cord over the rawhide to really mush it into the nooks and crannies, and it leaves something of a ridged texture once you remove it. The rawhide is, in my opinion, a great way to finish off the end of the antler on a primitive knife like this. It lends strength to the thinned antler and hides any flaws you might have from fitting the blade. In the case of this knife, there wasn't much tang because my drill bit broke off halfway down in the hole. It took some seriously creative shaping of the half-tang to get around that (and a lot of cussing). Between that and the general lack of size of the antler, I thought a good rawhide wrapping wouldn't hurt. Of course, it's also sewn up with real sinew for the thread. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.