David Kailey Posted August 22, 2013 Share Posted August 22, 2013 Made this for a friend of mine to say thanks for doing me a favor. You can get all the details on my site @ http://www.morganjadeironworks.com/project/7/3-candle-floor-table-stand-holde Quote Link to comment Share on other sites More sharing options...
John McPherson Posted August 22, 2013 Share Posted August 22, 2013 Interesting re-use of a disk harrow into something completely different. I like to see something so thoroughly transformed by the artist that it is hard to identify the source material. Refreshingly original concept and product, at least to me. Quote Link to comment Share on other sites More sharing options...
bosox Posted August 22, 2013 Share Posted August 22, 2013 That is, without a doubt, some of the most incredible craftsmanship and originality I’ve ever seen done in blacksmith work. Quote Link to comment Share on other sites More sharing options...
Crashresq Posted August 23, 2013 Share Posted August 23, 2013 Bosox sums it up perfectly!!! That has to be one of the coolest "upcycles" I've seen in a long time. Very artistic and quite beautiful. Quote Link to comment Share on other sites More sharing options...
VaughnT Posted August 24, 2013 Share Posted August 24, 2013 Oh, that is nice. Graceful, and cutting the disc like you did really diminishes it's visual bulk. Good job. Quote Link to comment Share on other sites More sharing options...
LastRonin Posted August 24, 2013 Share Posted August 24, 2013 I like it. Have a few of those myself... mind if I try something similar? Quote Link to comment Share on other sites More sharing options...
David Kailey Posted August 24, 2013 Author Share Posted August 24, 2013 I like it. Have a few of those myself... mind if I try something similar? Go for it!!!! I just want to see the pics when your done!!!! Quote Link to comment Share on other sites More sharing options...
David Kailey Posted August 24, 2013 Author Share Posted August 24, 2013 Thank you guys for your comments, I am very humbled by your appreciation. Quote Link to comment Share on other sites More sharing options...
LastRonin Posted August 26, 2013 Share Posted August 26, 2013 How'd you attach the upright pieces to the disc base? Quote Link to comment Share on other sites More sharing options...
David Kailey Posted August 26, 2013 Author Share Posted August 26, 2013 How'd you attach the upright pieces to the disc base? The disc has a square hole in the middle so i welded all the stems on the bottom. The piece also has a front and back so for stability I were the stems cross i welded the botton side on the back of the piece. Quote Link to comment Share on other sites More sharing options...
Paul Crosby Posted September 3, 2013 Share Posted September 3, 2013 What a beautiful design! I like the way you showed the progress from start to finish! Quote Link to comment Share on other sites More sharing options...
Camero68 Posted September 17, 2013 Share Posted September 17, 2013 Beautiful candle stand! Like the curves and scrolls and the unique base. Wonderful design and great execution. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.