the branch Posted June 23, 2011 Share Posted June 23, 2011 Hello there dear smithers! My name is Jens Michael Strassegger. I´ve been lurking around on this forum for a while without realy doing anything except a small comment here and there. Anyways, my addiction or whatever you choose to call it started 3 years ago and I havent been able to lay down my hammer since. (Its a bugger when its time to scratch that itch on the head) Anyways I'll save the rest for the introduction thread. Here are some of my latest blades. (made in the last... 3 weeks) Hope you like it. Feel free to check out my deviantart user where I have posted other pictures aswell! Deviantart Page Best wished from Norway -Strassegger Quote Link to comment Share on other sites More sharing options...
beth Posted June 23, 2011 Share Posted June 23, 2011 i dont make any blades but i love what youve done!! dont think that addiction is doing you any harm:) Quote Link to comment Share on other sites More sharing options...
the branch Posted June 23, 2011 Author Share Posted June 23, 2011 i dont make any blades but i love what youve done!! dont think that addiction is doing you any harm:) Hehe thank you. Well except for making my nerve systems totaly ignore burns and giving my fingers skin of a Spartan I agree xD Quote Link to comment Share on other sites More sharing options...
felix24 Posted June 23, 2011 Share Posted June 23, 2011 nice work my man. that's some cool pattern welding . Quote Link to comment Share on other sites More sharing options...
christian Posted June 23, 2011 Share Posted June 23, 2011 these are great! what steels did you use? I really like the patterns, howd you make them? Quote Link to comment Share on other sites More sharing options...
bigfootnampa Posted June 24, 2011 Share Posted June 24, 2011 I like those! They are sleek and stylish. Nice work! Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted June 24, 2011 Share Posted June 24, 2011 Really beautiful knives. You have learned well. Thank you for sharing them with us. :) Quote Link to comment Share on other sites More sharing options...
the branch Posted June 24, 2011 Author Share Posted June 24, 2011 these are great! what steels did you use? I really like the patterns, howd you make them? Thank you for the compliments! The steel is i think based on Norwegian clasification cause the carbon steel i normally use are called "20" (1%carbon) and "15" (0.8% carbon) and the nicklesteel i use in the patternwelding is called "15/20" so... yea... Its highcarbon steel with nicklesteel added into the mix? xD The one with the deep etch and random pattern I made with a old lamination (iron and steel) scrap which I had laying around, I thought that it was a bit of a waste so I wacked it out, twisted it and used the twisted lamination in a lamination... if that makes sense. Quote Link to comment Share on other sites More sharing options...
golgotha forge & anvil Posted June 24, 2011 Share Posted June 24, 2011 really greeat looking knives...WELL DONE!!!!! Quote Link to comment Share on other sites More sharing options...
christian Posted June 24, 2011 Share Posted June 24, 2011 Thank you for the compliments! The steel is i think based on Norwegian clasification cause the carbon steel i normally use are called "20" (1%carbon) and "15" (0.8% carbon) and the nicklesteel i use in the patternwelding is called "15/20" so... yea... Its highcarbon steel with nicklesteel added into the mix? xD The one with the deep etch and random pattern I made with a old lamination (iron and steel) scrap which I had laying around, I thought that it was a bit of a waste so I wacked it out, twisted it and used the twisted lamination in a lamination... if that makes sense. thats awesome and ive heard of 1520, ive had a few freinds that have used it. and I beleive 1520 is similar to 52100, another stainless steel with 1% carbon. and i think i know what you mean... :huh: Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted June 24, 2011 Share Posted June 24, 2011 thats awesome and ive heard of 1520, ive had a few freinds that have used it. and I beleive 1520 is similar to 52100, another stainless steel with 1% carbon. and i think i know what you mean... 52100 is not stainless, but a very nice steel, and last I looked its a bit above 1% carbon :) Quote Link to comment Share on other sites More sharing options...
christian Posted June 25, 2011 Share Posted June 25, 2011 haha guess that shows how much i know lol and how far above 1% is it steve? i have a few pieces of it so i would like to get my info correct on my material lol Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted June 25, 2011 Share Posted June 25, 2011 C 0.98-1.20 Si 0.15-0.35 Mn 0.25-0.45 P 0.025 max S 0.015 max Cr 1.40-1.60 Ni 0.25 max Cu 0.30 max FYI to be a stainless it needs at least 12.5% free chrome, not total content but chrome not bound up in carbides, This is why D-2 is not a stainless. Quote Link to comment Share on other sites More sharing options...
the branch Posted June 25, 2011 Author Share Posted June 25, 2011 I mainly use three types of steel not counting the normal iron bars. Its "20 steel": C 1,0 - Si 0,30 - Mu 0,45 - P max0,015 S max0,015 - Cr 0,15 and "15 steel": C 0,75 - Si 0,30 - Mu 0,73 - P max 0,020 S max 0,020 And the "15/20 nickle steel" C 0,75 - Si 0,30 - Mu 0,40 - P max 0,020 - S max 0,01 Ni 2,00 Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted June 25, 2011 Share Posted June 25, 2011 we call that 15N20 what is Mu ? not familiar with that... Quote Link to comment Share on other sites More sharing options...
the branch Posted July 3, 2011 Author Share Posted July 3, 2011 we call that 15N20 what is Mu ? not familiar with that... Probably Mo... I guess since Mu doesn´t exist Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.