GunsmithnMaker Posted November 17, 2010 Share Posted November 17, 2010 I bought this anvil last week and I've been pretty busy so I finally got around to taking some good pictures today. For some reason my flash wouldn't work so I had to rely on a florescent work light for lighting. I just signed up here last night and I found that some of you are very knowledgable about anvils. I have an idea of what it might be, but I wanted someone more familiar with anvils to verify or deny what I'm thinking.WARNING: Pictures are huge....sorry Quote Link to comment Share on other sites More sharing options...
Sask Mark Posted November 17, 2010 Share Posted November 17, 2010 I bought this anvil last week and I've been pretty busy so I finally got around to taking some good pictures today. For some reason my flash wouldn't work so I had to rely on a florescent work light for lighting. I just signed up here last night and I found that some of you are very knowledgable about anvils. I have an idea of what it might be, but I wanted someone more familiar with anvils to verify or deny what I'm thinking.WARNING: Pictures are huge....sorry It looks like a Hay Budden. It appears like there is the remanents of the word 'BROOKLYN' on the first picture, which was where Hay Buddens were made. If you have any pictures of the front of the base, there might be a serial number. That would allow someone with the book Anvils in America by Richard Postman to give you an approximate year of manufacture of your anvil. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted November 17, 2010 Share Posted November 17, 2010 I concur as I think you can see NY at the end of "Brooklyn". Serial number would be on the front of the anvil at the base; but may be rusted or otherwise unreadable. Quote Link to comment Share on other sites More sharing options...
eric sprado Posted November 17, 2010 Share Posted November 17, 2010 Hay Budden for sure. Interesting-My shop anvil is a 200# Hay Budden.Same amount of BR from Brooklyn and NY showing.Had it for years and didn't know what it was until I bought "Anvils in America" this year. What a gem of a book!!Somebody put the same zillion pock marks in a couple of my old anvils as though they made a lot of the same sort of tool and were testing the points on the side of the Anvil? Quote Link to comment Share on other sites More sharing options...
Frank Turley Posted November 18, 2010 Share Posted November 18, 2010 Hey Bud, You got a Hay-Bud. Yes a lot of dirt pick points were "tested" after tempering on the side of the anvil. Grant Sarver said one time on another forum that he was REQUIRED by his boss, as a young smith, to test tools thusly. Quote Link to comment Share on other sites More sharing options...
GunsmithnMaker Posted November 18, 2010 Author Share Posted November 18, 2010 Hay Budden it is! I thought it was an American Wrought because it was closest to the picture of the American Wrought anvils over at anvilfire.com. The man I bought it from has a Peter Wright that his uncle had given him. At first he gave me the choice, and I told him to keep the Wright anvil because I knew the name and thought he would regret getting rid of an heirloom anvil. Those are dense anvils. He let me bounce a hammer off of both of them and there is a world of difference. Here's the picture of the serial number and a 1 also seems to be stamped into the end. Funny I didn't see the number before I knew where to look. Same thing happened looking for the serial number on my Kubota tractor when I bought it. Here's the picture. Quote Link to comment Share on other sites More sharing options...
Sask Mark Posted November 18, 2010 Share Posted November 18, 2010 Here's the picture of the serial number and a 1 also seems to be stamped into the end. Funny I didn't see the number before I knew where to look. Same thing happened looking for the serial number on my Kubota tractor when I bought it. Here's the picture. Your anvil was manufactured in 1907 according to Anvils in America by Richard Postman. Quote Link to comment Share on other sites More sharing options...
Dragons lair Posted November 18, 2010 Share Posted November 18, 2010 Strange thing is the 1 standing proud. My H-Bs have inspectors # stamped in not cast. Ken. Quote Link to comment Share on other sites More sharing options...
Yance Posted November 18, 2010 Share Posted November 18, 2010 Strange thing is the 1 standing proud. My H-Bs have inspectors # stamped in not cast. Ken. I believe that inspector's # is stamped, just an optical delusion like this pic of my 10 cav Hall mould. As you can plainly see there are still bullets in it...or are there? Quote Link to comment Share on other sites More sharing options...
pulsusego Posted December 3, 2010 Share Posted December 3, 2010 i have a 136lb anvil with a serial number of 7052 and it has a sideways 4 beside it to the right can anyone tell me how old it is or who made it? Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 3, 2010 Share Posted December 3, 2010 Well without the other data in your other thread for this anvil it would be pretty hard to ID it. As your picture there shows a thin rim around the bottom I'd say it was an early HB. Anyone have AinA handy to check the date for the serial number? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.