elfshadow14 Posted November 12, 2006 Share Posted November 12, 2006 Hey does anyone know a good place that ships carbon steels like 1086 for a good price?It will be for knife making.I have searched the net but a lot of the places were not clear on how much it cost. Quote Link to comment Share on other sites More sharing options...
Woody Posted November 12, 2006 Share Posted November 12, 2006 Elf: Texas Knfemaker Supply has knife steel and everything else you would need to make your knife. They have a web site and also will send you a catelog. Woody Quote Link to comment Share on other sites More sharing options...
oakwoodforge Posted November 12, 2006 Share Posted November 12, 2006 1080, 1084 & 1095 are all comonly available from most steel suppliers ... 1086 is a bit different. The only guy I know that has any 1086 is Howard Clark, he had a batch made for him to his specs. If I remember right he said it was about 2 semi truck loads of barstock, I don't think he's selling though. But 1084 is pretty good for most of us mortals Jens Quote Link to comment Share on other sites More sharing options...
elfshadow14 Posted November 12, 2006 Author Share Posted November 12, 2006 Great I found a great deal on 1095 texas knifemakers.One question which would make a nicer small beginner knife 1080 or 1095 they cost the same. Quote Link to comment Share on other sites More sharing options...
oakwoodforge Posted November 12, 2006 Share Posted November 12, 2006 Either Steel is great but 1080 may be a littel less touchy when it comes to heat treating, If you can afford it I reccomend getting several bars of one steel at a time. That way once you get the heat treat nailed, you have plenty of stock to play with... Jens Quote Link to comment Share on other sites More sharing options...
FredW Posted November 12, 2006 Share Posted November 12, 2006 Try so 5160 spring steel. It's a bit more expensive than the carbon steels but I think it's a bit easier to work with. Kelly Cupples on the Knife Network has very reasonable steel prices including 1086. Fred Quote Link to comment Share on other sites More sharing options...
rthibeau Posted November 12, 2006 Share Posted November 12, 2006 I think Kelly Cupples prices are a little better than most.http://www.marksforge.com/steel_prices.htm Quote Link to comment Share on other sites More sharing options...
Alan DuBoff Posted November 12, 2006 Share Posted November 12, 2006 Hey knowledable ones, isn't the difference between 1084 and 1086 just 2% of carbon? Seems those are very close to each other. Can inexperienced folks like me tell the difference between them? (if I was forging them, that is ). Quote Link to comment Share on other sites More sharing options...
Woody Posted November 12, 2006 Share Posted November 12, 2006 no it is 2/100 of 1% difference. the numbers refer to points of carbon, each point = 1/100 of 1%. For example 52100 has 100 points of carbon or 1%. Woody Quote Link to comment Share on other sites More sharing options...
Frosty Posted November 13, 2006 Share Posted November 13, 2006 You guys buy 5160? While I don't make knives I do on occasion make bladed tools. when I run low on new stock I stop by the local spring shop and ask if I can BUY some drops. I always offer to BUY but so far, in better than 20 years of mooching, they've never asked for a dime. Be polite, ask if they have a few minutes to spare, explain what you do; blacksmithing has a mystique, take advantage of it. If that fails stop by about opening time with a box of doughnuts and ask again. Once you have a little practice give the shop's owner and maybe foreman a knife and you'll never have to buy 5160 or 9260 again. Frosty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.