August 16, 200619 yr Here are two knives I made recently. Still need to make sheaths. These are gifts. I don't do a good enough job to sell them. And I don't do it fast enough to make money anyway. I hope it worked uploading the file. We will see.
August 16, 200619 yr Author Wow! It worked. I'm not as think as I dumb I am! So I might as well add a few more.
August 16, 200619 yr Bob, You are selling yourself short - those knives look great! Keep it up - they look better than anything coming out of my shop! Take care -
August 16, 200619 yr Did you make the flint blades on those knives? flintknapping takes a LONG time man. All those knives are great! I've done a couple drop-point hunters like the first two, they're fun :)
August 16, 200619 yr Author Yup, I flintknap too. There is a big learning curve on that. Like how to properly apply a bandage! Lot's of blood in the beginning. Neat hobby. I sometimes do primitive skill demos for cub scouts/boy scouts. Someone will invariably ask if those are Indian arrowheads. My ancesters knapped as well, as all of ours have. The only problem is, I keep putting the point on the wrong end! Bob Harasim Coyote ForgePost edited Site Admin
August 16, 200619 yr Hey Bob Welcome to Iforge Iron, I like what you are doing here those knives are sweet especially that smaller one in the first pic. Is the handle maple ? Nice stone blades too I've tried my hand at knapping and so far all I can make is lots of gravel Oh and sometimes a chunk siutable for sale with a striker for a fire starter kit. Jens
August 16, 200619 yr I don't do a good enough job to sell them. And I don't do it fast enough to make money anyway. Keep at it... And you will!
August 16, 200619 yr Author OK, here are a few more. Oh, the handles on both of the first knives are maple. One is birdseye, the other is a not very curly, curly maple. Oh, the pictures don't do justice to the knives. The last knife looks like grinder marks on the guard, but that is just something in the digital image. I ain't that good with that camera. Bob Harasim Coyote Forge
August 16, 200619 yr Bob: get your knives out in front of the public, you may be supprised to see that many people will be willing to fatten your wallet in order to give your knives a new home. Good looking pieces. Woody
August 16, 200619 yr Bob, Taking better pictures takes some practice, some messing with the camera settings, and the right lighting setup. I 'm just starting to learn how to take decent photos. Check these links out for some help with photos, these guys have all helped me quite a bit.My "no frill" set up - Bladesmith's Forum BoardSharpByCoop.com - Professional Knife Photograhy by Jim "Coop" Cooper for the discriminating knife maker, collector, or dealer Jens
August 16, 200619 yr Author Hey Woody, I see you are from Rapid City. Spent a year out there, in the Air Force. Out in the Black Hills, I found a rock slide that had a lot of rose quartz. I found a nice, clear, football sized rock. But left it there, as I was in the AF, and didn't know what the heck I'd do with it. NOW, if I had that same rock, I'd try to knap it. I know that many Native Americans used some clear quartz to make some very nice points. Especially the Clovis points, which was a long spear point, that had a flute, or groove, down each side. The spear shaft was then split, and the splits lay in the groove, and then it was wrapped to hold all in place. I used to wander the hills, or bad lands by myself, hiking and taking pictures. Also, did a lot of trout fishing up in the hills. Nice places. Bob Harasim Coyote Forge
August 16, 200619 yr Bob, They look great! In the first post pictures what were the handles made of. They really stand out and look nice. I am new with blades and trying to learn what I can. Again good work!!!! Thanks TIM
August 17, 200619 yr Author Tim, the handles are a not very curly, curly maple, and a birds eye maple. The birds eye is my sisters x-mas present. Victor, I only last year started making knives. I needed some primitive knives for my mountain man group, and one thing led to another. I have actually been blacksmithing about 5 years, as a hobby only. Bob Harasim Coyote Forge
August 17, 200619 yr Author Well, I guess after further thought, I need to make a correction. I have been making knives for 2 years now. I tend to forget things, you know. Again, the first knives were made to represent early 1800 mountain man style knives. And the very first one I made, from a piece of farm equipment spring, I used to gut and butcher my deer last year. Works like a charm. I have carried some of my flint knives deer hunting, but wasn't successful enough to try them out. Which reminds me, I need to make a sheath for this years deer hunting knife. Bob Harasim Coyote Forge PS. One of the reasons I call myself Coyote Forge, is that my mountain man name is Coyote Bob. And the Native Americans believe the Coyote is a trickster, and uh, well, it kinda fits.
August 17, 200619 yr Author Here is a link to some good info on knapping. This fella is a member of my group, and gave me some lessons when I was getting started. flintknapping, how to Bob Coyote Forge and Sugarbush
August 22, 200619 yr Author Blade of 52100, and birds eye maple handle. Brass guard and butt cap. Tung oil finish.
September 7, 200619 yr Author And another one. This one goes to my wife. She picked out some Lacewood for the handle. Brass guard and pommel. Blade is 4 1/4 on the sharpened edge. I did some grinding today on 3 other blades. Just with the 36 grit belt. I'll finish those someday.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.