Jump to content
I Forge Iron

Justin Topp

Members
  • Posts

    856
  • Joined

  • Last visited

Posts posted by Justin Topp

  1. Yea that’s true. Some places it’s super expensive. Around here there’s lots of old wrought iron. I’ve spent about 40$ on all my wrought iron. Which is around a ton. Old farms mean lots of scrap which often co contains iron. 

  2. So a few days ago when I got my 6.5” Columbian leg vise I was happy. Well, I’m even more happy now. I bought this 8” leg vise for 125$ today. It is heavy! I put a 4.75” vise next to it for scale 

    2E12D6C4-E0EE-47A4-B56B-E3261E57C59D.jpeg

    90F21774-4784-4BFC-B1C0-703A0F399B13.jpeg

    EEC392C7-C414-44FA-BFBB-FE0B705DE3D4.jpeg

    BC789CEF-FAE5-42CC-8E7B-768BB92C403A.jpeg

    B7364976-E0A8-4B53-92D9-A9E317EA4280.jpeg

    A4CEDFF4-C61A-4092-AC24-2010C0A8A455.jpeg

  3. My 5.75” vise has the issue of being too loose haha. When it’s not tightened down I tend to smack myself in the face with the handle. Since it’s really long compared to any other vise I’ve owned. And well oiled so very little resistance. 
     

    I’d like. Small 3-4” vise for a few reasons. I’ve got plenty of decently sized vises. And no small ones, sometimes I find the jaws are too large and awkward to clamp small things. Plus if I ever need to take it somewhere. Say a craft fair or something it’s a lot easier to move a 30-50 lb vise than a 80-120 lb vise 

     

    Don’t get me wrong, I’d love an 8” vise haha just a small one is sometimes better for my use. 

  4. I’m just spoiled with leg vises haha. They are fairly common around here. The last 4 I got. 4.75” being the smallest and 5.75” being the biggest, only cost 77.50$ total. So that skewed my perspective im sure haha. It’s not uncommon for me to see 5.5-6” for around 100$ it’s more common to see that than 150-200
     

    Got it mounted, but I had to borrow the thrust washer off my smaller vise. Until I can forge a replacement. Also the pipe jaw is much simpler than expected. Some time with an angle grinder will make it easy to replace. 

    B0797EB3-8160-4BE4-81C7-0D4B9B1DA8F1.jpeg

    363B9E69-0030-49FD-8B21-6D7F1CF4AAB6.png

  5. Turns out all it was, was a little metal bb looking ball of rust. When I blew air though it would move and let air through. And than settle back. Water wasn’t able to push past it. Got it out then the pump worked fantastically. It shot coolant a good 3 feet so I had to shorten the pipe so that it didn’t go so far. The gear pump was fine. So I took it apart for nothing pretty much haha. 

  6. Oil stuff is pretty much all out west. Only things I can get easily from the oil fields is sucker rod and well casing. I’m going to see about contacting a coal mine. See if there’s and scrap, an axle or something. I went to an auction and there was a drag line axle that had to be 12-16” in diameter and a good 8’ long. Huge. Something like that would be fantastic I imagine 

  7. I looked around for shops that may use large sized stock to no avail. I’m sure they are out there. I wasn’t able to get in contact with the larger shops and the smaller ones don’t deal with steel stock big enough. I’ll try again. Believe me I tried to find some big enough stock but it just wasn’t happening at the time. I believe the local steel supplier sells 1”x6” bar stock. Which was too costly at the time of my build. But I could likely afford fairly soon. That would make a good enough anvil welded vertically I suppose. 
     

    My apologies if I come off as rude or as if I don’t appreciate your advise. Because I do value your help. Your definitely right that there’s stuff out there. It’s just hard to find sometimes. 

  8. Already putting a bit into savings each week for an Anyang. Similar to the quarter method. But not with physical cash. It will likely be a few years still . But I’m working on it! 
     

    There are two week sessions in the summer for agriculture research here. Planting and working on those small test plots. They pay rather well. I’m planning on doing at least one to help pay for a larger power hammer 

  9. Sorry for late response everyone, 

    The bearing thing is a little smoother than what I had other wise. This hits surprisingly hard. About the same as a 40-50 lb tire hammer I’d have to guess. Give or take. 
     

    id have to estimate cost at around 600-800 using almost all new materials. Definitely can be made cheaper. But a tire hammer would cost about 3500$ to make. Just for the fact I’d have to drive a few hours to get the anvil and a lot of other factors. 
     

    So far so good for longevity. No issues other than my electric motor appears to need replacing. But it was an old motor that was salvaged so I’m not surprised. I’m sure a tire hammer will outlast this by far. But this should hold up decently well. Easy to repair if there is an issue though. 
     

    It’s definitely good for what it is. And it’s much faster than hand hammering. That’s for sure. I think I’ll upgrade to a tire hammer eventually. This works for now though. It’s also really easy for anyone to build in a garage. You don’t really need any fancy tools. About the fanciest tool I used was a welder. I cut all the 1” plate for the anvil and ram using a standard 7-1/4” circular saw. Something most people have. 
     

     I would much rather have an Anyang but those are less budget friendly. Being 16 and only working part time I don’t exactly have as many funds as I’d like. One day I’ll get an Anyang! 

    Overall  it’s a great tool that’s a benefit for my productivity. And I look forward to using it more and experimenting with it. 
     

    Apologies if that was lengthy or hard to read. 

×
×
  • Create New...