Jump to content
I Forge Iron

Chris C

Members
  • Posts

    2,136
  • Joined

Posts posted by Chris C

  1. You guys are unmerciful today.   My mind is on a million other things.  Forklift Tynes........or forks, which ever you want to call them.  Just don't screw up and call'em tongues or someone might brand your tongue with a hot tong. !   This is gettin' down right redickeweluss!

  2. This is for all of you in the Oklahoma City area who are familiar with LA's Recycling. (only ones I know of are DHarris and Picker77

    Was looking for some 3/4" rod to use in tong making.  Came across this container with a bunch of it.

    20200625_111652.thumb.jpg.410d94169fe59bb5199a097d7949118f.jpg

    This is what's inside the container.

    20200625_121354.thumb.jpg.2420750f7f695a2edabd51097d9f1c13.jpg

    Weighs 13.5 pounds.  Cost me $5.15 with tax.

    The long arm is 60" and the support arm is 35".  If the material is any good, it ought to make quite a few pair of tongs.

  3. It would still allow gas and air to enter the burner box.........................but it wouldn't divert those materials towards the ends of the box to evenly distribute them to the entire burner face.   It might be over-kill, but I believe many people would agree it's important to get the entire homogenized mix out to all the holes in your plenum.  Here's a very poorly drawn sketch of what I'm talking about.  My baffle goes all the way across the box  but only covers about 2/3rds the length and is filled with random 1/4" holes.Sketch-half.thumb.jpg.131a820c3bd0d4a1f6adbe6bdbb5e692.jpg

  4. I put a baffle inside mine.  It was an upside down wide v-shaped thing...........kind of like a wing.  My understanding was it helped distribute the gas/air mixture toward both ends of the burner so the mixture didn't just go straight to the middle of the burner.  I'm no engineer, but all I can say is my burner worked flawlessly from the first firing.  Very happy with it.  This is a short video of my first firing.  So I vote for the diversion baffle inside the burner.

    p3866474508-210.mp4

     

  5. Thomas, the helical twist at the top isn't so bad.  It's when it reverses itself toward the butt end of the handle that poses the problem. ;)

    I may actually trim that bulge down a little, CGL, but for right now I think I'll just make it a permanent handle and go with it like it is.

  6. Well I made the handle.  The head end of it is sitting in a cup of Boiled Linseed Oil.  I'm kind of embarrassed to show it to anyone.  Doesn't look anything like any blacksmiths hammer handle I've ever seen.  On the majority of Dog's Head Hammers it looks as if the maker used a "Tomahawk" handle..........just straight.  This looks more like a carpenter's pin-nail hammer with a thinner neck.  I've always liked thinner necks on hammers because they allow the head to whip a little and they also don't seem to transmit vibrations back up the arm to the user, which I believe contributes to what many call "Blacksmiths elbow".........or Tendonitis.   Of course, that's just my (uneducated) opinion.  As good as the handle feels in my hand, I think I'll post a picture of it before actually installing it to see if there are any "no-no's" I've committed.  Originally I was going to shape the handle on my new belt grinder, but I didn't have a belt that did well with wood, so I used what I'm most skilled with, knives and a spoke shave.  I like the faceted surface and only hit it lightly with a 220 grit 3-M pad to slightly soften the facet edges.

     

    100571210_DogsHeadHammer-half.thumb.jpg.33ccc9f6a2975a09996e695e44705bd0.jpg

×
×
  • Create New...