Valentin

My first ...swage right ...this is how it is caled and my first anvil clamp for the power hammer ....that seems 2 work quite decent.This came after...6....7 atempts witch failed and with help from rhibeau , tring-it and some other guys here it is this swage has 2 in 1 1. Fish tail ...the swage with the hinge.(sry i coud not get a picture from above but the electric power was down when i took the picture) 2. don't know how to call it but i have a picture that shows what it does...(the ,,hole'' texture on the 30x30mm square)

i have 2 new budys folowing me .... a 300A welder-invertor witch i am really proud of and a old scale that i found at the junk yard ...my 2nd this is a 10kg :)

greate CAT !!! i used to have one to...

10x for the replys... i really apreciate your help It has a hand oil pump ...and the oil lines has a glas portion where u can see the oil level ...how often do i have to push the oil up the lines ? every 30 seconds ? or i shuld just make sure that there is oil on the glass portion when i use it Yes the hammer felt on the left side and the piston was at it's lowest position when the hammer droped because the anvil was not yet instaled I don't know if it's a BECHE hammer but it can be ...i am from Romania Europe and this is an european maufactor right ?There is nothing written on it and the owner just bought a building with the hammer inside and has no information about it..no paper no nothing .And i ... i never seen/used a power hammer in my life except this one i will atach some pictures with the oil circuit and pump...it's an older photo ...had 2 repair the pump because of the drop the lever was broken ...now it is fixed

10x for the reply i instaled the dies and i never used it without them .The picture was taken way back...and yes the shaft is retracting all the way back when it is at idle speed and at (On position) Yes all the controls got broken but weldet them on place and the drop...was with a litle bang ...caz the hammer landet on dirt not concreet. I don't know anything about who manufatured it ...the only words that are writen on the hammer is 1987 i guess this is the year when the hammer was made. The hammer weights 3tons and has a 3phase engine 11kw with 6 belts...2day i poundet a little with it all seems to be just fine till now When the piston is way up ...if i look inside the sleeve i can see it moving up and down ...but it does not get lower than the ...sleeve...how shooud i call it ...the black painted plate where the screws are inserted.. And i have one more question .... What is this ??? in the picture -the small pipe with the cap- behind the big wheel ...shoud i put oil or vaseline ??? or is it for something else ?

here is mine http://www.iforgeiron.com/gallery/showphoto.php/photo/972/cat/500/ppuser/613 and another view http://www.iforgeiron.com/gallery/showphoto.php/photo/971/cat/500/ppuser/613

i instaled a power hammer a few days ago... and while i was getting it into the shop it droped on one side ...since then there is oil coming down the piston i thought that it was because when i was droped he oil went up and now it has 2 come down ..but ... i don't know ...any ideas ? is it normal lubrefiation ? or is it something broken....i used the power hammer for a while ...like 3 minutes all works fine but oil is leaking

Hello there and welcome 2 the forum If you look at the gallery pictures you will see many forges designs. Making a forge is quite easy...depending on what you need it for. I've made so far around 5..6 diferent forges and experimented with them ...I right now ...use a propane forge (just because it's not messy like a coal forge and i don't get so dirty). You will need some fire bricks (terracotta) a big Tank (the bigger it is it won't catch ICE) and a burner... you can private me and i'll show you some scheches or you can find me on chat some times ! Good luck

well i just bought it ..looks old and has not even one straight surface. I was reading the project's that irnsrgn posted about anvil repair but ...i don't think that they aply for this anvil...i was thinking about mounting a new plate on it ....so i can still hmmer it. any ideas how do i do it? fix it ? well here it is