Reeltree

drift weights' to slow your vessel down while fishing the river 

I like your excavator's toys. Instead of changing out buckets on the track hoe he just keeps a different size bucket on different track hoes.

Das, you were just thinking ahead when she gets older and you can use it to pull motors.

Picked up a couple of die and holders last night at the auction house. They had been laying in dirt and crud for who knows how long. A little go juice and a wire wheel and they seem to be in good condition. One is a Champion Blower and Forge. 

Put together a circle cutter for the torch

A good power washing to knock down the dirt and dust, then put a fan to blow through the window/ cut out an opening to the outside same concept as when spray painting , to blow the over spray out.  A one time washing will not hurt the wood beams.

Can you post the size of the biggest square cutout in the center for me , thx

If they are fairly new, they are junk, have had cows rub up against them and they snap in two.  Have pulled out old old ones from the mountains that where made of good steel and are stuff as nails.

I use to have to turn in the old cv joints for the core charge. Don't miss having to change those out.

Alexandr,,Im always at aw with your creations, I am curious if the chard beams have a noticeable smoky aroma in the room area

yes bunion stretcher

Didn't work,I think the feathers woven into the buckskin shirt scared it away

Had a bald eagle pay me a visit in front the shop today

What burns my butt (other than a 3 foot flame) is seeing someone get into their vehicle start driving and then start using the phone.  Why not do whatever needed done on the phone BEFORE you take off and get on the road. Unbelievable

58er , the handle end bone accent really ties it all in. Was pondering doing a bottle opener  with bone shaft and end for my wonderful physical therapist.

Finally found a little ol' lady who was selling her deceased husband's truck, 2007 Ford ranger  XLT 22k miles 4 x 4  auto . Was beginning to think they were only a myth.

I like that idea.

Just pick up the guillotine with dies in it a couple times and have the  die fall thru the bottom. I drilled a 5/16 hole in the bottom plate to punch out die if gets scaled up.

Solid 1 inch stock in hardy, 1/16 th inch flat bar scrap cut into pieces then welded .  Primed and finished with ghost grey industrial paint. An uneven grind on the bottom plate edge looks as if not sitting flat on surface, it is.

This little gullitine I scraped together today pales in comparison to alexandr's endevers.

Absolutely Amazing

I would go with the building the tractor is in.  The old corn crib has a wooden floor and untold amount of small flammable debris most likely, if anything comparable to the one on  the corner of my barn. The tractor shed , you can always build off the side with enclosure or just a shed roof for future expansion.  Use the smoke house for its intended purpose.

Excellent work

We used them for canoe anchors

Was inspired by the reverse twist jig video,,,torch heated a piece of 1/2" for test run