Jump to content
I Forge Iron

royce unruh

Members
 View Profile  See their activity

  • Posts

    135

  • Joined

  • Last visited

 Content Type 

Everything posted by royce unruh

  1. royce unruh
    i might mix sand with good ole georgia red clay and mix a little water in it so it hardens good
  2. royce unruh
    thanks if i would weld some pieces at the lowest i would put the anvil would that combat that tendency
  3. royce unruh
    sry bout the different sizes was playing with the resolution on my cell camera
  4. royce unruh
    people in the chat room last night were wondering what kind of welder i was using so i decided to take pics of our shop and let yall see our buisnes the welder i was using is the miller this is the welder the last one here is where i been working the last 3 months its the plasma table
  5. royce unruh
    as an american i dont know if i can read that book i got the idea from "the backyard blacksmith" by lorilei sims
  6. royce unruh
    ok it was a good idea and i will have quite a bit of tweeking to do my welds are terrible right now i think its cause i never welded in a box before so this is a prototype to learn by hope the next one will turn out better
  7. royce unruh
    i am starting on an anvil stand i have it drawn out in autocad right now waiting to be set up on the plasma table will post pics as it come together it will be a sand filled stand with a floating plate on top of the sand with a small amount of room about an eighth in. and 1 in of extra room between the needed height for the plate and the top none of this will be forged that i know of yet anyway
  8. royce unruh
    will try wire brush though thanks
  9. royce unruh
    well i dont want it to rust away more than it has its already hard to read
  10. royce unruh
    what about surface rust on the sides i want to paint the sides so the lettering is more visible and i am not worried about the face cause i know that will just work off
  11. royce unruh
    a project i did for a girl cousin who broke her arm a few days ago the paint hides the blemishes very well
  12. royce unruh

    "better to be silent and be thought a fool than to speak up and remove all doubt"

  13. royce unruh
    to see my forge check out this link its not like any i have seen anywhere on this site yet but i guess i havent looked around much either http://www.iforgeiron.com/topic/28012-my-coal-forge/
  14. royce unruh
    to tell u the truth the smoke doesnt bother me much just when i turn the blower while lighting but its not in its permanent sutup yet so that might change the vise is on the other corner from the blower and the anvils about 3 feet behind that threaded rod like i said its not set up right yet i think i will forget the chimney till its set up the right way thanks though
  15. royce unruh
    thats the way it is ferrous that four in pipe has a closed off 3-1/2 in inside with that threaded rod to adjust the holes open or closed the pic i got of that didnt turn out good so i trashed it oh i forgot to say i live in louisville georgia usa
  16. royce unruh
    ok thanks that was kinda what i was thinking some of the people in the chat room were trying to get me to put one on was wanting some other opinionsthanks
  17. royce unruh
    do you think i need a chimmney? i dont know if i want one and my friend forges with me sometime.any questions or comments feel free to say
×
×
  • Create New...