KevinD

Clapton...

"Well I'll be..."

In honor of this thread...I watched 300 last night.

Lets hear about the distilling operations. :D

Boardwalk.

Looks like a real good time.

Nukular...

Goldschlager

Stripper...

Less taste

Thanks Jr. I'm learning a lot about these saws. (I hope these links work) Video of Millers Falls saw - Practical Machinist - The Manufacturing Forum Millers Falls color - Practical Machinist - The Manufacturing Forum this old saw again.... - Practical Machinist - The Manufacturing Forum HP needed to run a power hacksaw - Practical Machinist - The Manufacturing Forum

machine...

Lunch! ..

crackers...

I have just such a treadmill. Hmmm...

M. F. Co. Millers Falls Mass power hacksaw I won in "iron in the hat" at the Bealer guild meeting yesterday. The moving parts are a little sticky but move freely by hand. I need to figure out a motor and gearing to turn it at 40 rpm.

Peepers...

I use a pump bottle with soapy water to check for leaks. Just spray all the connections and watch for bubbles. If you see and just snug the fittings up. Use Teflon tape at the connections but don't over tighten and be sure not to let the tape get into the lines. Also be sure to keep the propane hose clear of dragons breath. I have run mine up as high as 10psi and figure it could go higher but it burns propane quicker if you do. I generally run anywhere from 5 to 7psi.

This is basicly what I built. Freon Tank Propane Miniforge Much more info here. Ron's Forge Page and here... Forge and Burner Design Page #1

Somebody say tank?

Snaggle toof

Take some pics...I wanna see.

bartender.

snow......

OK...I agree. Theres a problem with the box... ;)