sfDuck

I'll try again to get the picture up!!!!!....................DANG

I'll try again to get the picture up!!!!!....................DANG

Many thanks Fellas That answers the question. Its euro 120............Duck

I found this at the scrapyard when looking for shapes. The shape I was looking for was round shapes and this just jumped out at me. Looked great for making bowls. Of course it needs a little altering, but it has a good base to mount in the vise and you can use it to form over or into. But what was it??? .....................Duck photos available at post #23 this thread

One more suggestion for the pile. Make the hawk handle out of ash or maple. Start with two pieces the have one long side planed flat. Then use anything on hand to make two cuts in a V shape on each piece of wood. Theis hole only needs to be the width of a straw so don't go too big, any hole with work. then glue the two flat pieces together with a large clamp, vise, plywood in a vise what ever. The point is the seam will not be shown if the edges are flat. Then file or shape the handle to suit. Many natives used this method for long pipe Hawk handles or for regular pipes. If the seams did show cover it with decorations. Short an simple fellas.................Duck