plain ol Bill Posted March 12, 2006 Share Posted March 12, 2006 Take a pic of how you have your leg vise mounted and share them. I want to make a new mount and need to see if someone doesn't have an idea I just got to have! Bill Quote Link to comment Share on other sites More sharing options...
henerythe8th Posted March 12, 2006 Share Posted March 12, 2006 Hey Bill, That sounds like a grand idea, I have a post vice that needs mounting and would like to see what folks have to offer, too. Hthe8th Quote Link to comment Share on other sites More sharing options...
irnsrgn Posted March 12, 2006 Share Posted March 12, 2006 check here, http://www.iforgeiron.com/Tools/Vise.htm Quote Link to comment Share on other sites More sharing options...
one_rod Posted March 12, 2006 Share Posted March 12, 2006 Mine was a pinched design from the Blueprints. 4" steel pipe (complete with flange) and whatever bits of scrap were about at the time. one_rod. Quote Link to comment Share on other sites More sharing options...
metalmaster1766 Posted March 18, 2006 Share Posted March 18, 2006 here is my vise, its mounted to a 4" pipe welded inside a semi truck brake drum, i can fill it with wheel weights, take them out to move it outside if i want, or i can bolt it to the floor to make it more solid, i try to keep some of my stuff portable so when its nice i can work outside till i get the addition on my shop Ronhttp://www.iforgeiron.com/forum/attachment.php?attachmentid=22&stc=1&d=1142714018 Quote Link to comment Share on other sites More sharing options...
plain ol Bill Posted March 22, 2006 Author Share Posted March 22, 2006 Here is a pic of the one I made. Can drag it around the shop to whichever forge I am working with. Quote Link to comment Share on other sites More sharing options...
Rick Barter Posted March 22, 2006 Share Posted March 22, 2006 Bill, You don't have problems with it moving around on you? Can you share what stock it's made from? rvb Quote Link to comment Share on other sites More sharing options...
plain ol Bill Posted March 22, 2006 Author Share Posted March 22, 2006 Rick I haven't had much opportunity to use it yet but if it starts to move around on me I will attach a standing area out of 1/4" plate to it. The top and base are 5/8" plate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.