Jump to content
I Forge Iron

Miscellaneous tools for a newbie

Recommended Posts

If your tool list is Avil, hammer, fire and stock then set the mark on the sharpest edge of the anvil. If you're looking to mark the center of the spring then balance the stock on the end of the horn and strike. Reverse the stock to compensate for the taper of the horn and hit it again. Reverse, NOT flip it over. Now with the center of the spring section marked lengthen the spring by working back up the taper of the horn, reverse every once every step. It'll stay centered on balance, if it tips strike more to the low side.

Frosty The Lucky.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...