Jump to content
I Forge Iron

New sign install

Double Y

Recommended Posts

This is a sign I installed yesterday.

The sign is 6 foot tall and 8 foot wide.  This is a 3 layer sign.  There is a piece behind the wording at the bottom.  All made from 10 gauge.  The sign itself weighs over 450 pounds with the legs.
The vertical rock is over 12 and a half foot tall.  It weighs north of 4000 pounds.
We dug a hole to set it in.  The butt end measured about 24 x 33.  We put in about 600 pounds of concrete around the base.
The sign has 4 adjustable legs to allow for the difference in the rock and attachment.  I am going to add a support leg yet from the back of the sign down to the ground.  This is in a high wind area and I think it will benefit from a bit more support.
The sign is on the Arrow Creek Exit just off I-90 East of Billings, MT towards Hardin, MT.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...