terminal99 Posted September 7, 2007 Share Posted September 7, 2007 It looks like this anvil was made to slip over another piece. It does not sit flat on the ground. I picked up this champion forge at the same auction. Quote Link to comment Share on other sites More sharing options...
yesteryearforge Posted September 7, 2007 Share Posted September 7, 2007 its only part of an anvil/vise combo its missing the other half and the screw mechanism probally cast iron to boot Mike Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted September 7, 2007 Share Posted September 7, 2007 It's the kind of anvil you use to straighten bent nails---if you only need to de a couple every now and then. Cast iron, no mass under the "face" it won't hold up to much hammering. Quote Link to comment Share on other sites More sharing options...
Glenn Posted September 7, 2007 Share Posted September 7, 2007 The vise / anvil combo comes apart into the vise and rail section and the anvil section as shown. You have the anvil section only. Click here vise / anvil combo to see the thread on the IForgeIron Forum discussing this object. Quote Link to comment Share on other sites More sharing options...
terminal99 Posted September 7, 2007 Author Share Posted September 7, 2007 Thanks for the replys. I appreciate it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.