RedStarIronworksSMA Posted May 4, 2013 Share Posted May 4, 2013 Hello Everyone, This is a curved bathroom door that we just installed. First pic is the drawing that we had laser cut from 14 ga mild steel sheet and rolled to the curve. The door is 2 inches thick and the cut sheet is infront of the painted sheet behind giving nice depth and shadows. Second pic is the whole door and last pics are closeups. Let us know what you think. Very Best Regards, Preston Quote Link to comment Share on other sites More sharing options...
SoCal Dave Posted May 4, 2013 Share Posted May 4, 2013 Wow, that is impressive. How was it finished? Water is the devil when it comes to metal. That is over-the-top with the birds, dogs, coyote, goats, etc. Quote Link to comment Share on other sites More sharing options...
Robert Yates Posted May 4, 2013 Share Posted May 4, 2013 Very good work nice to see folks still have pride in their work . Sam Quote Link to comment Share on other sites More sharing options...
RedStarIronworksSMA Posted May 4, 2013 Author Share Posted May 4, 2013 Thanks, the colored panel was painted with acrylic and attached with screws after the paint dried. The metal was coated with nitrocelluse lacquer...yes, it is available here in Mexico and very inexpensive ;>) Best Regards, Preston Quote Link to comment Share on other sites More sharing options...
Hilt and Hammer Workshop Posted May 4, 2013 Share Posted May 4, 2013 Fantastic ! Quote Link to comment Share on other sites More sharing options...
Jim Coke Posted May 5, 2013 Share Posted May 5, 2013 Greetings Preston, Way over the top work... It's fun when you have clients that appreciate craftsmanship . Jim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.