Spots Posted November 7, 2012 Share Posted November 7, 2012 Well I have some friends who were intrested in learning some blacksmith work, and decided they wanted to come out Nov. 17th and 18th. So then I invited a fellow memeber from here who lives close by, and decided we would open it up into a Hammer In. I understand this is very fast notice, and that a lot of people won't be able to make it. Also, we have a small shop, but a big area with about 40 acres. So if you have a portable setup, please bring it with you as we currently only have one forge and one anvil. We do have plenty of coal, and there is electricty on site. Please vote in the poll here and let me know if your coming, and if your bringing another setup with you. Anyone and everyone is welcome to come. The only lodging on site will be camping, or you can stay in a hotel in Oak Ridge, TN about 30 min away. Here are the details When: Nov. 17th and 18th, 2012 Where: We will meet at the Hardees at 528 East Tri County Boulevard Oliver Springs, TN 37840 at 8:30 am eastern time. We will leave there between 900 and 930 to go the shop which is about 20 min. The shop address is 386 Duncan FLats Ln Briceville, TN 37710. What: Hammer In and Blacksmithing get together If you have any questions please post here. Also please bring lunch and dinner, as none will be provided, and its a long drive to town. Also if you want to drive out for both days, and dont wanna camp outside, or rent a hotel, I can open the garage at my place about 20 min away and your more than welcome to sleep there. It is equipped with a full bath including a shower, and can sleep 10-15 people on air matresses Quote Link to comment Share on other sites More sharing options...
Robert Yates Posted November 7, 2012 Share Posted November 7, 2012 This is going to be an Awesome event of the old Appalachian mountain folks getting together for a good time . I am in the works to be there . Sam Quote Link to comment Share on other sites More sharing options...
jmccustomknives Posted November 7, 2012 Share Posted November 7, 2012 If you were just a little closer :( Quote Link to comment Share on other sites More sharing options...
Spots Posted November 7, 2012 Author Share Posted November 7, 2012 If you were just a little closer :( Make the drive. Ill make sure you have an air matress at my place for the night Quote Link to comment Share on other sites More sharing options...
jmccustomknives Posted November 8, 2012 Share Posted November 8, 2012 Sounds inviting, unfortunatly I'll be trying to make a little extra $'s to support my hobbie that weekend at Tannehill Trade Days. You can always make a cable knife in my place. ;) Quote Link to comment Share on other sites More sharing options...
Captkhowell Posted November 8, 2012 Share Posted November 8, 2012 How close to Andrews NC are you? I have a home north of there near Santetlah......I may be up there then! Quote Link to comment Share on other sites More sharing options...
Spots Posted November 8, 2012 Author Share Posted November 8, 2012 Mapquest says 3 hours from Andrews. Quote Link to comment Share on other sites More sharing options...
Captkhowell Posted November 8, 2012 Share Posted November 8, 2012 Looks like 91 miles from the town our house is in.......and tis across the tail of the dragon.....I am gonna try ......and I really wanna go, but since we are going up on Dec.....it may be a stretch.....but now I know that someone is close to the second home! Quote Link to comment Share on other sites More sharing options...
Captkhowell Posted November 8, 2012 Share Posted November 8, 2012 When we go up in Dec for about ten days.....I am looking HARD for an anvil.......in Florida, they are hard to find....wish me luck! I don't want to spend five hundred clams on one...... Quote Link to comment Share on other sites More sharing options...
rhdelaney Posted November 11, 2012 Share Posted November 11, 2012 That sounds really cool Quote Link to comment Share on other sites More sharing options...
slowpoke Posted November 12, 2012 Share Posted November 12, 2012 Hey, Spots, Sorry I'm not going to be able to make it to your hammer-in - sounds really great, though! Just wanted to let you know that our organization, AACB (Appalachian Area Chapter Blacksmiths) is having its annual meeting on Saturday 12/1/12 at the Appalachian Center for Crafts in Smithville TN. Travis Fleming from AL will be doing a demo starting at about 9:00 a.m. & there will be "ladies' programs" at the same time. Then there will be a meal, iron-in-the-hat, and a good auction with a lot of tools. Hope you might be able to join us there - it's always a good time. Good luck with your hammer-in! Slowpoke Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.