Jump to content
I Forge Iron

Anvil repair in Maine, NH, VT

Recommended Posts

Hi, about 10 years ago I bought a peter wright anvil for 50 dollars if I loaded it in the truck alone :) . She weights 421 lb and has a well worn face taht could use some repair edges and a little build up aprox 1/4 inch to 3/8 in a swoop . She has good ring to it and rebounds well. After divorce I got the equipment she got the shop so things are up in the air till a new shop is settled upon. I do not have a welder but I am willing to haul her a fair distance to get repaired if anyone know some one who could do this :)
Just let me know I wi taqke picture of her and post them soon .
Thank you
Firegnome Forge Hampden maine

Link to comment
Share on other sites

Hi Jim-

New England Blacksmiths have occasional anvil repair days, contact Bob Menard on the NEB site http://www.newenglandblacksmiths.org/contacts.htm to see if he is planning one at his shop in Portland anytime soon. There is also often one mid winter in Western Mass., I'd join NEB (only $20) and ask around.

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...