Phillip Patton Posted January 19, 2011 Share Posted January 19, 2011 I'm forge welding a billet of about 20 layers: Quote Link to comment Share on other sites More sharing options...
FieryFurnace Posted January 19, 2011 Share Posted January 19, 2011 NICE! Man that thing moves! Thanks for posting! Quote Link to comment Share on other sites More sharing options...
s meyer Posted January 19, 2011 Share Posted January 19, 2011 Nice hammer thanks for the video :) Quote Link to comment Share on other sites More sharing options...
peacock Posted January 19, 2011 Share Posted January 19, 2011 Phillip it looks great. I have a 125 just like it and it's a beast. On the drawing die it will pinch a cold 5/8 square into with 2 blows. It will also taper 1/4 inch to a fine point with no problem. these are realy great hammers, however they don't compare well on the current test as the slack belt clucth don't get moveing till about 6 or 7 blows. Enjoy your hammer we will talk about your dies soon. Quote Link to comment Share on other sites More sharing options...
ianinsa Posted January 19, 2011 Share Posted January 19, 2011 Great looking hammer, thanks for posting! Ian Quote Link to comment Share on other sites More sharing options...
Dillon Sculpture Posted January 19, 2011 Share Posted January 19, 2011 Looking good, becoming more comfortable and finding the rhythm will increase as the work gets done. I would be interested to see some other Bradley hammers listed in the "test" go ahead and get it going around before you stick the stock in for the 5, 10 blows, its a little tricky more so with a fast hammer like you have. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.