Here is my propane cylinder forge all cranked up. I hope my picture comes through.

Here is a shot of my burner choke and slots. I bought Michael book and the new propane bottle about two years ago and after a visit to birdogforge owned by Bruce Godlesky, I got busy and built my burner and forge. I have a lot to learn yet. I think the next thing I need to do is some tongs.

Looks good!

Riley, you did a fine job on that forge and burner!!

HOT glowy forge! Always a good sight.

Nice job Riley. Have you heated anything in it yet?

Frosty

Thanks for the nice comments. Bruce has seen it first hand and we cranked it up and Bruce did a forge weld. I burned up a tank of propane messing with it, and forge welded a billet from some steel cable I got from Bruce Godlesky. Made some scrolls and a leaf. Heating hammering and learning.

Smoke, fire , noise, what else could a kid want????? (BOG)

Sounds like you have a really nice forge. Hope to see some of your work.

Sounds like you have a really nice forge. Hope to see some of your work.

Here are some pieces that were'nt total disasters. The leaf was made from a piece of 1/4x1/2 hot rolled.

Those look pretty darned good.

Gotta love it.

Frosty

Nothing wrong with that stuff! Keep on hammering.
Finnr

Nice work and great job on the forge and burner... I built a couple of those burners myself. Nice job on the flair!