Zeke25

Thanks guys for the help I added some stuff to my profile just lmk if there’s anything else as for the anvil, I did some more test today and with the ball bearing test it was rebounding around 70% (minimum 65%) in the middle of the face on the ground without being anchored down, it also weighs 57 pounds. The sound in the middle of the anvil rings but not for more than 3/4 of a second in the heel it is higher pitched and a little louder but the horn is very loud ping with that echoey effect in your ears thanks

Hi, I just got this anvil as an heirloom and was wanting to know a little more about it and if anyone could tell me a brand or some specs. It definitely is cast because it has a seam but I didn’t know if it was cast iron or steel leaning toward steel because it does have a ring but I know very little about anvils thank you. https://ibb.co/2hMs5q2

Hey guys thanks for the info and as to my experience I am still new to forging I only have a several months of experience but a ton of YouTube videos and f&f thanks

Hi, so there is a Dale pocket cutter near me listed on marketplace for fairly cheap the person selling it says they do not know what tonnage it presses at but by the looks at it it looks to be fairly sturdy with a large cylinder so I would think that it would be strong enough to become a forge press I just don’t know and I wanted more opinions on it. I’ll see if I can’t get a picture to work https://docs.google.com/document/d/1DUY0zsnlDRdf1tfjoQ3n8trkU_bkBEQyEOhg5Am6d4Y/edit https://ibb.co/NrPcB6G