Jump to content
I Forge Iron

Supaflupa

Members
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

 Content Type 

Everything posted by Supaflupa

  1. Supaflupa
    Neither of y’all need to worry I was able to get it fixed
  2. Supaflupa
    I think you have it confused with mortar. Their are some that do both but the one I plan on using is meant for creating seats for the bricks to sit in it isn’t for sticking them together.
  3. Supaflupa
    Thank but no thank you. I do know of brake drum forges and I have access to all the parts necessary to make one but I have the extra money and time to build something better and more enjoyable to use so I plan on doing so.
  4. Supaflupa
    Ok I’ll keep my eye out
  5. Supaflupa
    I want to make the move from propane to coal and I plan on using an old charcoal grill how people use riveters forges by casting in the Firepot and everything. I’m on a bit of a tight budget with this and good furnace cement isn’t cheap. Anyone know a cheaper alternative I can use to cast in the table I do plan on casting the pot separately out of a good furnace cement.
  6. Supaflupa
    I’m not looking to make my own wrought iron through smelting or anything. I’m wondering why if were to forge weld a bar of mild on itself over and over it wouldn’t get a grain.
  7. Supaflupa
    So the the refining process isn’t what gives wrought iron its grain?
  8. Supaflupa
    My theory is that it has something to do with the forge welding process. Like using silica instead of borax, letting it oxidize just enough to replace scale from the bloom. But I have no experience with wrought iron and very minimal experience forge welding so I figure I’m wrong.
  9. Supaflupa
    Funny enough I just left the dentist
  10. Supaflupa
    I’ve been using a cheap welding brush but it doesn’t get off the scale
  11. Supaflupa
    Thank you I’ll keep that in mind
  12. Supaflupa
    I’m wanting to get get my work looking just that much better by brushing off scale before hammering it in. The cheap wire brush I got from harbor freight doesn’t seem... stiff enough I guess. I always still see scale on my piece even while brushing. Anybody know a good brush that won’t break the bank or maybe an alternative?
  13. Supaflupa
    I don’t have any good pictures right now only the one I put. I’ve had it soaking in pb blaster for a little over a week. I’ve been taking it out and tapping at it and jiggling the gears every couple days. Tbh I’m not even completely sure it’s a no.40 it’s only marked as a champion blower. But i got it attached to a riveters forge. The forge itself is pretty much scrap the fire pot is completely rusted through and the air duct is in pieces.
  14. Supaflupa
    Cvmikeray I know this conversation is old so I hope to God you see this. I have one of these blowers and the gears are completely jammed I have been staring at it for weeks to no avail and I’m getting desperate. I cannot seem to open any of the images in these chats. I’m struggling to understand how to disassemble the gear box. If you could help me that’d be amazing.
×
×
  • Create New...