Jump to content
I Forge Iron

rock-n-time

Members
  • Posts

    76
  • Joined

  • Last visited

Everything posted by rock-n-time

  1. A little late... What you are doing is raising. As one said coppersmiths lay out a spiral or circles spaced evenly from the center. you need a radios steak or a muchroom steak. a raising hammer. a planish hammer.TIME! and if thay are going to gether mak shur you put a hole in it! i can give more info.
  2. I have been out back diging around and this it. I better og find the oops page read how.
  3. rock-n-time

    this is a start

    This is just the start. of a new road in life for me. more to come.
  4. Naw Frosty I'm sorry i will have to get the term's better. it is bpo192 gas forge, The blue print page.
  5. ok, try and get out of the box.last night i was on a brit knife site. this chap did his kinfes (scails)in Ti.and at one i did some annodizing of Ti. out of the thin stuff 28-32ga. i'v e got some picks coming. newbe on the louse!!!!
  6. Frosty I get the flare part. on blueprint agent was necking a 3/4 pipe just after the fitting. leaving some thing like ><.just concaved where do i put jet. or how far down the pipe can one go.
  7. Naw Jeremy that is for earings. As BBBwas saying his brother was useing a 3/4 round. so it looks like you can buy larger stock. I wonder if one can change the ccolor.
  8. i am trying to be a bladesmith. I am old, but wet be hind the ear on this site.HeHe I have work with Ti but only in sheet 28-32ga.
  9. Will some be so kind as to tell or give some info onTi, how work it. Thanks True
  10. I'm new not even a week hear. I was enguraged to post my wear a bouts. I for one think it's ok not just ok it truly works. An IFI member lives a few miles east of me. And we coffe this morring. So thanks IFI
  11. I am in Pequot Lakes MN. The land of 10,000 +taxes
  12. I'm new to the site and new to black&knifesmithing. I'm going to hit the wall some day:o. I can not beleve what I'v found hear.It took a week to find it! IT IS THE BEST! Ok, I was just layed off. No big deal. I'm going to some thing for Me! I'v been runing around back 40. All the xxxx has just truned in to Gold! I'm going to take some pics from the start. I have started building a forge, gathering any metal in my back 40. (don't have a 40)Then I will start the power hamer. Thanks for ya'lls site
  13. Hello, I'm new at this, so I will be short. Dowels are a good start. but is it wood? brass is a good choice too. And as Frosty said Felt! I would go for the mounted ones.
  14. It is Good to find a place as this. I will not be far a way. So much to see & do:}

×
×
  • Create New...