The Alchemist

It was z-weld flux.

Is there any way to clean flux from a dense ceramic floor in my gas forge?

Thanks guys. You all answered my questions and then some!

That should be a link.

I'm about to start some ornamental forging and I'm going to need to bend some metal. I'm looking for any recommendations you have. Are these things any good and can they bend tube? https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjRvMinxOLYAhVMPIEKHdpeBSwYABA_GgJ5dw&ae=1&ohost=www.google.com&cid=CAESEeD2fv-fQb-XcX28_oI9C7pn&sig=AOD64_3Fuxr7jxan7YVQhXzgp5Djtu_RSQ&ctype=5&q=&ved=0ahUKEwj18LunxOLYAhVP2FMKHT5lBggQwg8InwE&adurl=http://www.grizzly.com/products/Compact-Bender-System-Floor-Model/H3184%3Fiparcelcountry%3DUS%26gclid%3DCjwKCAiAqIHTBRAVEiwA6TgJw8_RkUxhwY1SmKB8-8dx-pCNQ8rdlB_3gDBr38zqzP3oWDszheEqVhoCaIMQAvD_BwE

Are you forge welding?

What kind of forge do you have?

Hello forum, I am soon to have a better shop and I want a bigger gas forge. I am torn between diamondback and a majestic. I have heard some bad things about the majestic, but I want to hear some good things. I am wanting to make hammers and demascus. Does anyone have experience with a three burner majestic forge?

That is very interesting! I'm the only one in my kitchen who doesn't complain about the heat.

I am a chef when I'm not blacksmithing. I guess I just like fire. I have been making handles and sayas for a little while now, but this is my first knife. Hand forged 52100. Blade length is 9.5 inches. I have it between 62 and 65 rockwell. I heat treated by eye. The handle is a Japanese wa style made from Lignum Vitae with a black and white ebony ferrule. Thanks for looking, Josh Cooper

No, I don't have the book. I will look into getting one. I had a feeling about this steel. Does t15 steel have a low magnetic attraction?

I'm not really sure, but I think I have some t15 steel. It came from an industrial metal cutting lathe. The pieces are large, plenty to make some blades. Any and all thought welcome on this. I haven't forged any yet and I want to know if I'm going to have problems doing it. Thanks everyone! Cooper

I find this very interesting. First I started with a very large speaker magnet. I grinded the side that was attached to the basket flat. I then put it on the bottom of the flat horn. What is so interesting is that the position of the magnet causes different results. I can move it mere millimeters and cause the anvil to ring again. Right now it is totally ring free. So if you have tried a magnet and was not satisfied, try it again.

I put a sheet of industrial rubber under my anvil and then put a pretty large speaker magnet under the shelf, the ringing has stopped. Thanks everyone for your recommendations.

It makes sense. Hold a bell by a wooden handle, it rings. Put the bell against the ground and it mutes. I get it now. The metal transfers the vibration to the ground.