Kallsme

It

Please explain the meaning of this line, im not sure wath you mean.

Could you post some pictures of your various methods of rigging material? maybe some of the dangerous and safe ways of doing it

Here is one of my 500kg Beche´hammer i use daily in my shop

The sledgehammer i forge is only for my own fun, i usually dont
forge this cind of stuff. see, Karlskoga Hammar & Hejdarsmide HB - granbergsdal, karlskoga hammar & hejdarsmide hb, friformsmide, but-skruv, stuksmide, smide i rostfritt

You can click on this link to see a short movie from my shop
http://www.hammar-hejarsmide.se/hammarohejarsmide2.wmv


Kallsme´n

I use a forge with a big oilburner, ( Diesel ) Dimension inside 1000 X 1000 X 500mm.

I started with a big skarapiron 154 X 154 X 85 and forge it 90 x 95 x 225
and than punch a small hole in it and than punch the hole bigger and bigger to fit the handle.

Than i forge it a little bit smaller in both ends and than i calibrate
all the measure to the fininshed size.

And ofcourse, i use my 500kg Beche

Ok here it comes



Kallsme

I forged a "small" sledgehammer of pice of skrapiron 15kg:)



Kallsme

I use one of my 500Kg Beche

Do you think "Little Herman" like his othe buddys in my forge.



Kallsme

I forge a " Small " candleholder ( dont know if it

More photos

All the damage part will be replaced, such as bearings, pistonrings,.........





Kallsme

This is my latest project in the forge.
Its a 150Kg Beche hammer from 1966,
That will bee the fifth airhammer in my shop.
Its gonna be totally rebuild and installed in the forge during this year.
This hammer has been out of order for tha last twenty years, and not under roof for at least 15 years.










Kallsme

It

More picture





Roger

Here is another crazy forgings from me to celebrate the Swedish biathlon
womens olympic goldmedal.









Roger

Hello there

To celebrate the swedish hockey team, i forged a hockeystick!!
Take close look at the puck, it

We allso got a goldmedal in biathlon and hochey
So there is more to come :shock:

Roger

Yes,that

i would recomended 4340 and heat it up only with the tourch and than
let it cool down with kompressed air blown to it. i would guess it will be about 50hrc.

Another steel you could use is 1045, this is a steel with 0,5% carbon and you can chill it in water and the sarface been pretty hard. about 55hrc.

Roger

It

I forge a curling stone to tribite the swedish women in the olympic games.

From a 154mm squarebar and 165mm lengt, ( puh, thats a heavy one)











THE TEAM :mrgreen: Me to the right



Roger

Here is the blueprint of the pneumatic setup of my airhammer



Roger

I think your cylinder would fit perfect DonS.
The sice of the anvilschaft is 170mm ( allmost 7" and 800mm long)
But i think you can use your pices for a 30 pound hammer.
You can weld it on a thick iron plate, maybe a 2 inches.

Good luck

Sorry squeesplay, I

Hello

Here is one picture of my home made airhammer, who worked with kompressed air.
It

Of course you can, do you want breakfast allso

Roger

I use this forge to heat the material.
It