-
Posts
717 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Dave51B
-
-
Neil, that is what I use. Only thing different is I used 1/2" stock for the jig. That lets me use 1/2" drive sockets for the various size bushings. I think I got the idea from here somewhere. I surely didn't come up with it on my own...... Life is good Dave
-
Very good thread.....learned a bunch and saved me from asking a bunch of dumb questions. I've been burning some corn for a future Co. Fair demo, I just was having a bit of trouble. Thanks Life is Good Dave
-
44 minutes ago, foundryguy said:
A foundrymans perspective on heat treat.
So yer saying my concept of a bonfire on the beach, a speed boat with a boom pole and a few brown bottles is a bad idea.... dang-it... oh well. Life is still good Dave
-
ventilation .........
-
7 hours ago, Whowhenwherewhatshappening said:
I'm trying to figure out how to remove all the rust,
Look up electrolysis for derusting.....saves a lot of elbow grease. I just lay an oil soaked rag on the anvil to protect the face between forge sessions ......nice anvil by the way......Dave
-
In that case yer the same as local....Check out the IBA ( Indiana Blacksmith Association ) website. There are several groups within driving distance, even one that meets at the State Fair grounds once a month. I will be heading over to Rushville shop Saturday. Dave
-
OJ.....what part of the Hoosier State holds yer shadow? There a bunch of us around. If ya need any local info let me know. Life is Good Dave
-
I like the challenge of transforming a known object into a totally different object. I must admit, I have met some great like minded people along the way..... Life is Good Dave
-
A bit of a drive, but I buy mine in Oden, In. good coal..... Dave
-
4 hours ago, Berkley Wagar said:On 3/21/2019 at 10:59 AM, ThomasPowers said:
how would i check to see if it is cast iron?
What did the guys @ the meeting say about it?
-
Nope no fee....just show up. Maybe bring something for iron in the hat, and a few bucks to buy tickets for the drawing. That was maybe Bill Newman? I don't know for sure. I have only been there once, and it was all good.....Got a coil spring off a train or something, I'm still making tools from that thing....awesome. If ya go, report back on how it went. Gotta move my son into his new house that day.....Don't be scared....they won't bite...lol Life is Good Dave
-
Berkley, if you happen to check back in here. The satellite 13 group is meeting @ the state fair grounds blacksmith shop this Saturday. Take the anvil with you and you can get input on it, first hand. If your just looking to sell it, you might run into a buyer.. Life is Good Dave
-
Rust travels to the red post....I am positive of that........ Washing soda is a good electrolyte .Find it in the laundry detergent isle. About a Tbls. per gallon of water.... Dave
-
6 hours ago, Kozzy said:
it was about $ .50 USD each
Thanks a bunch for that. Like I said, I have been asking for years...Even the old smiths at Quad-State didn't give me a solid figure...speculation, but not firm. Maybe I didn't ask right, who knows...(What was that Carlson guys name?) . Now you got me thinking I need to check in with some of the old shops to see if they have any records from years back.....
I guess what got me Thinking about all this is....next month we have a meeting @ my favorite shop. It's a line shaft shop with an ideal plow sharpener in working order. I gotta round up some more shears..... Life is Good Dave
-
1 hour ago, ThomasPowers said:
Have you asked around at any of the old folks/assisted living/nursing homes
Oh, I have been asking for years..My Dad soon to be 94 and a life long farmer, all his old buddies,multiple tractor club members, anyone at antique tractor shows, etc.....Shoot, I can't even get a solid answer to how much the b/s charged to sharpen. Let alone repoint. I was raised on the farm and have plowed thousands of acres. However none with B/S shears, until recently when I started collecting plows...I do have a few..
44 minutes ago, Kozzy said:any 10 farmers will give you 15 answers
Oh you got that right !
What I did today after thinking on it overnight, was to take a NOS plow shear and hold it on the anvil and forge a piece of flat leaf spring on it to the face of the shear. Welded that to a piece of angle iron to clamp in the post vice for a mandrel to put the proper radius back into a drawn out shear. The point of the shear is where the "suck" comes into play on soil types in my opinion...(1 of 15).....I do have some "haw" replacement points for you walkin' guys. I just plow "gee" anymore. Thanks for the feedback Life is Good Dave
-
13 minutes ago, Donm said:
I have an Arm and Hammer 100#er
Does it have a serial number? Look on the foot under the horn. I also have an A&H 100 lb. Great anvil ..... Dave
-
I have abit of experience sharpening plow shears. The question I have is, does anyone know the proper radius of a blacksmith shear to create the proper "suck" to get the shear to go into the ground properly? It sure would be easier if I had a mandrel to finish the face curvature instead of eyeballing it. I can go into more detail if needed, but an old time smith out there surely knows off the top of his head. Thanks in advance Dave
-
A few years back when starting out, I put my mark on the back of my work. As things improved I started marking the front. Now it seems I look to place it more front and center. The problem I am now finding is, it seems I need to order a smaller one for the work I am doing. I need to check with the guy out in Idaho if he can make me another one in 1/16 inch. The 1/8 inch is just to big at times. Life is Good Dave
-
Berkley, Welcome,Have you checked out the IBA website? Check out the list of groups near you. There are some great guys nearby. If ya need something let me know..... Life is Good Dave
-
They look like worn spike tooth harrow ( ground leveling farm equipment ) tines to me. But, most I've been around are just straight. The wear on the bottom is indicative of being drug over the ground though. Life is Good Dave
-
Got a tractor with 3 pt. hitch? Maybe a boom pole. Shot in the dark....... Dave
-
Ok. I'll throw out my thoughts.....Loose the dolly and design an anvil stand that can be moved with a 2 wheeled hand truck. Chasing an anvil while working is no fun.....I picked up a 2 wheeler with 8" rubber tires @ HF for $64 IIRC. Dave
-
Sweet...yer gonna love that little lady. Can't believe you haven't picked her up yet. What's the hold up? I have her big sis @ 100 lbs. and that thin heel is perfect for the type of work I do. Keep in mind she'll be a bit loud and she will definitely let ya know if you miss strike..... Life is Good Dave
-
I...C.....
What did you do in the shop today?
in Blacksmithing, General Discussion
Posted
I think yer right Jim, makes good use of those flee market sockets......works a treat..... thanks Dave