cwilliams

Love your tooling and the feathers turned out great. Thanks for sharing your technique. CW

Well I finally got the foundation done and poured for my Big Blue. I decided to go the truck route on the concrete, and very glad I did. The pics tell the story far better than I can. Thanks Phil (Forgemaster) for the advice on the pockets for the imbedded nuts. It worked very well and allowed me to not have to pickup the hammer to place on foundation. THis is a very slick setup and I see using it again if I ever have to pour an isolated foundation. Chris

Thanks so much everyone for the advice, it is truly appreciated. Its alot to absorb so I will ensure to take photos and post here so others can see the direction I took. I like the idea of attaching the welded rod to the rebar structure, which I had not considered before. Thats why I asked, but the pipe with welded in coupling nut sounds appealing also. I will ensure to keep my concrete wet, and will also now call my local concrete company. It might save me the trouble of renting a mixer and getting a pallet of bagged concrete. Bryanwillman No not really, the main reason people use a separate deep foundation is to isolate their power hammers thumping from the main shop slab. Therefore hopefully keeping the slab from cracking and or knocking things off shelves and or abusing the structure. Chris

Hello everyone, I am in need of alittle advice. I have recently purchased a big-blu 155 and felt the working height could be alittle higher than it was compared to my other power hammmer. So I decided to cut my concrete and dig a foundation and in the end have a concrete platform sticking out of my slab 5 inches tall to place my big blue on. I will probably dig down about 36 inches or so and will also emplace bolts in the concrete to bolt the hammer onto. Does anyone see any problems so far with my plan? Now onto my questions. Does anyone have any photos of the rebar structure they created when creating a power hammer foundation? If not how close to the surface should I allow the rebar to be? I appreciate any advice offered on this subject as I am terribly ignorant in this area. Also any advice on what concrete to purchase, I plan to mix it myself with a rented mixer. Attaching two pics of where I currently am at on this project. PS Yes I used the long drill bit to break up the clay, Its a cheapo harbour freight bit and it worked very well with my cordless drill.

Curly george Looking good, You will be real pleased with your hammy I have a feeling. I love mine, pictures on my website at www.blindhogg.com Let me know if you ever need any photos, or dimension checks. Would be happy to help if i can. Chris

First off I would not make it so tight that the forge could not expand to some degree. I one time built a welded angle iron frame that contained firebrick when making my first forge. I just made sure it was not so tight, I probably had about 1/8 slop. Now heres the bad news I could never reach welding heats with the firebrick forge, so I rebuilt it with some round pipe and 2inches of K wool w a satanite wash and now easily reach welding heat. Good luck with your forge. Chris

Super impressive, Do you mig the stainless or Tig it. So realistic looking, If you dont post over at www.artmetal.com you should. They would love you over there. Chris

Feukair I am just finishing a grinder myself, Yours looks really good. You can always upgrade your motor later after you use it for awhile. Chris

I got my nickel last year from Admiral steel, a online steel store. Worked great for damascus. Although I now use 15n20. Chris

15n20 is not something you are going to find in most metal shops as its a specialty steel. Best to get some from Kelly cupples or Admiral steel. I personally use Kelly and am always pleased, upside is he will shear it to the sizes you need. Chris

Gun cold blue does not wear well, I personally hot blue. Pain in the U know what to setup for that though, if you are still considering paint you might want to try KG Gunkote. Its a paint that is airbrushed on then baked in a oven. Far far more durable than regular paint, I use a $10 airbrush from Harbour freight and it applies it quite well. Chris

Just a guess but sand blasting might work, or have you tried that? Chris