Rhrocker

I've been thinking about an iron worker lately. Like everything else, prices vary from one end of the rainbow to the other . Just need it for really basic tasks, and don't see the need for anything over than about 50 tons. If you're wondering why, it's because I am disabled with fairly sever back, hip, knee and shoulder osteoporosis, which has meant several operations, and don't want to go throught that again if I can help it. Seems like a IW would be a great tool for me, if that is I could find one reasonable enough. I'm currently looking in the Grizly catalog, and Enco also. I know there are more better sources and units, but I'm not very conversant with these things, and the budget is limited to around $3K, which really puts a dampner on things probably. So, do any of you have one, and how is it working out for you? Any used ones out there? Oops, that's a tailgate topic I guess. Robert

I really like your Aspen leaf bowl. I was wondering if you actually "sank" this one on your press, or did you weld up the leaves into the bowl shape? Also Rory, when you do sink a bowl, what do you normally use in the top die? I think you said you use a 5" pipe in the bottom. This is sure nice work!

KEWL KEY!

RoryMay, I'm new to the forum, but I went through all of the old pages of this forum and tried to get a grip on people that caught my attention. You were one of the artists that really held my attention, that's for sure. I really like the massiveness of this mirror, and the wall hanger. Reminds me of something in a castle, or on a very old boat from centries past. Keep on showing, I'm enjoying!

Opps! Sorry, didn't mean to pull the photos in again. I'm learning, I'm learning.

Wow! Beautiful woodwork and ironwork! What talent, they must get some from a relative!

Dave, where'd you go? What do you think of these ideas, and did you experiment some with your idea?

Great craftsmanship! I didn't know Jim Poor had a DVD out Mike, could you tell me where I could get a copy? Years ago I saw him and his pretty wife do a demo, they were awsome.

I can't seem to find the other photos?? RH

After extensive checking with the technical staff of the company that manufacturers the infusion pump I use, their opinion was that it would be ok to use, but that there could be a hazzard to the pump motor if stood by it for any length of time. Therefore I've decided to wait on getting an induction forge until either my pump is removed (which may be within a couple of years,) or I hire someone to take over my forging work, while I concentrate on fit and finish. I want to thank those that were interested in reading the forum, plus extend my gratitude to those that provided their opinions. Robert Hensarling

Right, exactly guys, thanks. I'm in contact with him (doctor) and he wanted me to find out if there was anyone else in the same situation that was doing ok. He doesn't see a problem. I can get around microwaves and MRI's without a problem either. Not looking for a final answer in any one place, but was wanting to see if there might be anyone out there in the same boat. Ya never know. I really appreciate the answers, and Monster, you ARE the smartest blacksmith I know!!!

Hi guys. My business could definately benefit from having an induction forge. Waiting for my coal or even propane forges to come up to speed is something I could do without. Here's my situation; I have a medical device implanted in my abdomen that's basically a pain medicine pump. It pumps medication into my spinal column 24/7 in tiny amounts (broke my back in a skiing accident in 93). It's ok to use around microwaves like those found in the home kitchen, and can even handle most MRI machines. If the machine does affect the pump, it's only that it shuts off the little motor inside the infusion pump until the MRI is shut off, then it restarts. With this in mind, I'm fairly confident that I'd have no problems using the induction forge. At the same time however I want to be as safe as possible, and I'm wondering if having some sort of shield (lead?) between me and the forge may help matters? I've also seen lined vests that some of the medical personal wear to protect themselves against differient forms of radiation. Anyone have any experience along the lines of what I'm asking? Many thanks! Robert

Thanks Monster! I'm thinking about either a 15 or 25, and leaning towards the 25. I'd use it for both knives and generalized blacksmithing (meaning art stuff, kitchen/bath items, but nothing really big and heavy like your railing). I think the 15 would handle all that I mentioned, but I do have several hundred pounds of W2 I got from Don Hanson, and the 25 would be handy for that also. Would you happen to have a photo of your setup? I think you were having some issues with cooling in some earlier posts. Thanks!! Robert

Monster M, how are you liking your 25? Robert H